► Carbitool | Planer & Buzzer Blades

Smooth Cutting Performance for Timber Finishing When every pass counts, Carbitool Planer & Buzzer Blades deliver the sharpness & balance needed for clean timber surfacing.Built from high-speed steel (HSS) & tungsten carbide (TCT), these blades provide long-lasting edge retention, even under heavy feed rates. Whether you’re flattening boards, squaring stock...

Smooth Cutting Performance for Timber Finishing

When every pass counts, Carbitool Planer & Buzzer Blades deliver the sharpness & balance needed for clean timber surfacing.Built from high-speed steel (HSS) & tungsten carbide (TCT), these blades provide long-lasting edge retention, even under heavy feed rates. Whether you’re flattening boards, squaring stock or prepping panels for finishing, Carbitool blades leave a consistent, glass-smooth surface that reduces sanding time & material waste.

Favored by joiners, cabinetmakers & furniture builders across Australia, Carbitool’s blades are manufactured to strict trade standards for straightness, hardness & edge accuracy. They’re designed for both workshop machines & on-site buzzer setups, holding alignment through repeated passes & high RPM.

Use them with Saws | Hand & Power for accurate pre-cuts, Clamps & Vises to stabilize stock & Router Bits to complete edge profiling. Protect cutting edges with Tool & Equipment Care & keep replacement sets ready in Tool Storage.

With Same-Day Dispatch from Industrial Shed, Carbitool blades arrive honed & ready to install—sharp enough for immediate use straight out of the box.

What’s in This Collection:

► Buzzer Blade 3mm x 30mm HSS 510mm Length
‣ High-speed steel blade for long cuts on dense hardwoods.

► Buzzer Blade 3mm x 30mm HSS 250mm Length
‣ Ideal for compact planers used in cabinet & furniture workshops.

► Buzzer Blade 3mm x 30mm HSS – Cut To Length
‣ Custom-length option to match specialized planer models.

► Buzzer Blade 3mm x 25mm HSS 510mm Length
‣ Provides smooth, even stock removal on softwood & ply.

► Buzzer Blade 3mm x 25mm HSS 410mm Length
‣ Balanced blade suited for mid-size workshop machines.

► Buzzer Blade 3mm x 25mm HSS 250mm Length
‣ Compact design for fine trimming & finishing applications.

► Buzzer Blade 3mm x 25mm HSS – Cut To Length
‣ Flexible sizing to suit older or custom planer setups.

► Buzzer Blade 3mm x 20mm TCT – Cut To Length
‣ Tungsten carbide edge for extended life & reduced sharpening.

► Buzzer Blade 3mm x 30mm TCT – Cut To Length
‣ Heavy-duty option for high-volume planning & continuous feed work.

 

Sidebar
Filter
  • 10
  • 15
  • 20
  • 25
  • 30
  • 50
  • Featured
  • Most relevant
  • Best selling
  • Alphabetically, A-Z
  • Alphabetically, Z-A
  • Price, low to high
  • Price, high to low
  • Date, old to new
  • Date, new to old
Sort

Sort by:

  • Featured
  • Most relevant
  • Best selling
  • Alphabetically, A-Z
  • Alphabetically, Z-A
  • Price, low to high
  • Price, high to low
  • Date, old to new
  • Date, new to old

Showing 0 of 0 products

No products found
Use fewer filters or clear all

Performance That Stands Up to Australia’s Toughest Workshops

Made to endure long hours & tough timbers, Carbitool Planer & Buzzer Blades combine edge stability with cutting consistency. Each blade is ground for a smooth feed, even under continuous machine use. That means straighter surfaces, reduced tear-out & fewer time-consuming passes.

Integrate them into your setup alongside Specialty Woodworking Tools for precision shaping, or match them with Wood Finishing Products for seamless post-planning results. Keep surfaces clear & safe using Dust Extraction & Safety Gear & rely on Same-Day Dispatch for immediate replacement when a set wears down.

Built for professionals who expect workshop-grade results on every job, these blades balance sharpness, toughness & value. With Tool & Equipment Care supporting ongoing maintenance, you can count on Carbitool blades to hold up through constant workloads & demanding timbers.

► HSS & TCT options for extended cutting performance
► Precision-ground edges for smoother timber finishing
► Suited to joiners, cabinetmakers & general woodworkers
► Resharpenable design for long-term cost efficiency
► Backed by Same-Day Dispatch & Trade Guarantee

Frequently Asked Questions

HSS blades offer finer finishes on softer timbers, while TCT blades maintain edge life longer when cutting hardwoods or abrasive materials.

Yes. Both HSS & TCT blades can be professionally sharpened multiple times if handled correctly.

Clean blades after use, coat lightly with oil & store them in Tool Storage sleeves to protect cutting edges.

Brands