► CARB Toroidal Roller Bearings

CARB Toroidal Roller Bearings for Non-Locating Bearing PositionsCARB toroidal roller bearings are specialised self-aligning roller bearings designed to carry radial load while accommodating axial displacement within the bearing. They are used in the non-locating position of a correctly designed bearing arrangement, where thermal movement, shaft expansion or deflection must be...

CARB Toroidal Roller Bearings for Non-Locating Bearing Positions

CARB toroidal roller bearings are specialised self-aligning roller bearings designed to carry radial load while accommodating axial displacement within the bearing. They are used in the non-locating position of a correctly designed bearing arrangement, where thermal movement, shaft expansion or deflection must be accommodated without imposing unwanted axial force on the system.

This collection contains 191 SKF CARB references. Live product titles identify C, C22, C23, C3 and tapered-bore variants where applicable. A matching bore alone does not establish a safe substitute: the complete designation and the equipment’s locating strategy must agree.

How CARB bearings differ from other roller bearings

CARB bearings combine self-alignment with internal axial displacement. That role is different from a locating bearing and should be selected as part of the complete shaft arrangement. Do not replace a spherical or cylindrical roller bearing solely by dimensions; confirm the original bearing position, axial-location method, load direction, housing fit, speed, lubricant and operating temperature.

For alternatives within the bearing system, compare Spherical Roller Bearings, Cylindrical Roller Bearings and Plummer Block Housings.

Read the designation before ordering

Record the full code on the existing bearing, including every prefix and suffix. Check bore, outside diameter, width, radial internal clearance, cage configuration, seal arrangement and cylindrical or tapered bore. Product titles in this collection include examples such as C2212TN9, C2318K/C3 and C4122V/C3; each suffix can affect the selected bearing or its operating clearance.

Where a sleeve-mounted bore is specified, verify the sleeve, locknut and lock-washer arrangement rather than assuming these components are included. View Sleeves and Locknuts & Washers when checking the complete mounting hardware.

Installation and condition checks

Inspect the shaft, housing seat, seals and lubrication system before fitting a replacement. Follow the bearing and equipment manufacturer’s mounting method, lubricant specification, quantity and relubrication interval. After commissioning, monitor temperature, vibration and noise; these observations can help identify alignment, fit or contamination issues before they damage the assembly.

Related components and brands

SKF is the brand represented in the current CARB range. For a complete housed arrangement, review Bearing Housings & Complete Units and Mounted Bearing Units. These links support comparison of the surrounding system; they do not establish interchangeability.

CARB Toroidal Roller Bearing FAQs

Can a CARB bearing replace any spherical roller bearing?

No. CARB bearings have a particular role in a locating/non-locating arrangement. Confirm the original design, full designation and manufacturer requirements before changing a bearing type.

Does a CARB bearing carry axial load?

Its role is to accommodate axial displacement while carrying radial load. The complete bearing arrangement determines how axial forces are controlled, so check the equipment design before selecting a replacement.

What information is needed to match a CARB bearing?

Provide the complete existing code, bore type, dimensions, clearance or suffix details, housing arrangement and application. This gives the strongest basis for comparing listed product options against the equipment specification.

Sidebar
Filter
  • 10
  • 15
  • 20
  • 25
  • 30
  • 50
  • Featured
  • Most relevant
  • Best selling
  • Alphabetically, A-Z
  • Alphabetically, Z-A
  • Price, low to high
  • Price, high to low
  • Date, old to new
  • Date, new to old
Sort

Sort by:

  • Featured
  • Most relevant
  • Best selling
  • Alphabetically, A-Z
  • Alphabetically, Z-A
  • Price, low to high
  • Price, high to low
  • Date, old to new
  • Date, new to old

Built to Handle Thermal Growth

From rotary kilns to paper drying sections, CARB bearings help maintain alignment & prolong machine life in high-load, high-temperature environments. We ship Australia-wide with technical support & trusted brands.

► High radial load capacity with built-in misalignment tolerance

► Eliminates axial loading on surrounding components

► Available in open & sealed designs for harsh conditions

Frequently Asked Questions

Why choose a CARB bearing instead of a spherical roller bearing?

CARB bearings offer axial displacement within the bearing, eliminating the need for locating/non-locating bearing pairs—ideal for thermally expanding shafts.

Are CARB bearings suitable for vibrating machinery?

Not ideal. While they can tolerate misalignment & high radial loads, for intense vibration, spherical roller or cylindrical bearings may perform better.

Do CARB bearings require special housings?

No. They fit standard housings but are typically paired with locating bearings like spherical roller bearings to allow axial movement in long shafts.

Brands

SKF

SKF

► CARB Toroidal Roller Bearings

CARB Toroidal Roller Bearings for Non-Locating Bearing Positions

CARB toroidal roller bearings are specialised self-aligning roller bearings designed to carry radial load while accommodating axial displacement within the bearing. They are used in the non-locating position of a correctly designed bearing arrangement, where thermal movement, shaft expansion or deflection must be accommodated without imposing unwanted axial force on the system.

This collection contains 191 SKF CARB references. Live product titles identify C, C22, C23, C3 and tapered-bore variants where applicable. A matching bore alone does not establish a safe substitute: the complete designation and the equipment’s locating strategy must agree.

How CARB bearings differ from other roller bearings

CARB bearings combine self-alignment with internal axial displacement. That role is different from a locating bearing and should be selected as part of the complete shaft arrangement. Do not replace a spherical or cylindrical roller bearing solely by dimensions; confirm the original bearing position, axial-location method, load direction, housing fit, speed, lubricant and operating temperature.

For alternatives within the bearing system, compare Spherical Roller Bearings, Cylindrical Roller Bearings and Plummer Block Housings.

Read the designation before ordering

Record the full code on the existing bearing, including every prefix and suffix. Check bore, outside diameter, width, radial internal clearance, cage configuration, seal arrangement and cylindrical or tapered bore. Product titles in this collection include examples such as C2212TN9, C2318K/C3 and C4122V/C3; each suffix can affect the selected bearing or its operating clearance.

Where a sleeve-mounted bore is specified, verify the sleeve, locknut and lock-washer arrangement rather than assuming these components are included. View Sleeves and Locknuts & Washers when checking the complete mounting hardware.

Installation and condition checks

Inspect the shaft, housing seat, seals and lubrication system before fitting a replacement. Follow the bearing and equipment manufacturer’s mounting method, lubricant specification, quantity and relubrication interval. After commissioning, monitor temperature, vibration and noise; these observations can help identify alignment, fit or contamination issues before they damage the assembly.

Related components and brands

SKF is the brand represented in the current CARB range. For a complete housed arrangement, review Bearing Housings & Complete Units and Mounted Bearing Units. These links support comparison of the surrounding system; they do not establish interchangeability.

CARB Toroidal Roller Bearing FAQs

Can a CARB bearing replace any spherical roller bearing?

No. CARB bearings have a particular role in a locating/non-locating arrangement. Confirm the original design, full designation and manufacturer requirements before changing a bearing type.

Does a CARB bearing carry axial load?

Its role is to accommodate axial displacement while carrying radial load. The complete bearing arrangement determines how axial forces are controlled, so check the equipment design before selecting a replacement.

What information is needed to match a CARB bearing?

Provide the complete existing code, bore type, dimensions, clearance or suffix details, housing arrangement and application. This gives the strongest basis for comparing listed product options against the equipment specification.