► Bremick | Struct Iso Washers

Structural Fastening Support for High-Load Connections Bremick Struct ISO Washers provide a purpose-built bearing interface for compatible structural bolted connections across steel fabrication, construction, machinery, infrastructure & industrial maintenance. Bremick's structural washer range includes metric plain & galvanised options, with current product listings covering key structural fastener sizes across the...

Structural Fastening Support for High-Load Connections

Bremick Struct ISO Washers provide a purpose-built bearing interface for compatible structural bolted connections across steel fabrication, construction, machinery, infrastructure & industrial maintenance.

Bremick's structural washer range includes metric plain & galvanised options, with current product listings covering key structural fastener sizes across the M12–M36 range depending on the selected product. This gives trade buyers a clearer specification pathway when matching washers with structural bolts, nuts & connection requirements.

For complete structural fastening requirements, Structural Fasteners & Bolts provides a direct pathway into complementary fastening products for steelwork, fabrication & construction.

What Are Struct ISO Washers?

Struct ISO Washers are heavy-duty flat washers designed to form part of compatible structural bolted assemblies.

Positioned beneath the applicable bolt head or nut, the washer creates a defined bearing interface between the fastener & connected surface.

Within a correctly specified assembly, structural washers can:

► Provide a defined bearing surface beneath the bolt head or nut
► Distribute clamping force across a broader contact area
► Support compatible structural bolted assemblies
► Protect the immediate bearing surface from direct rotating fastener contact
► Help maintain the specified fastening arrangement
► Complete structural connections where washers are required by the fastening specification

The correct selection sequence is:

Bolt specification → washer specification → diameter → dimensions → material → finish → connection requirements → installation method

A washer shouldn't be selected simply because it fits over the bolt.

For wider fastening requirements, Nuts & Washers provides access to complementary nuts, washers & related fastening hardware.

Why Choose Bremick Struct ISO Washers?

Bremick supplies fastening products across Australian construction, industrial & trade markets, with dedicated structural washer products available within its metric fastening range.

Current Bremick product information identifies:

► Metric structural washer configurations
► Plain finish options
► Galvanised finish options
► M12 structural washers
► M16 structural washers
► M20 structural washers
► M24 structural washers
► M30 structural washers
► M36 options within relevant ranges

Bremick identifies its plain metric structural washer family under product code WSTMP, while its galvanised metric structural washer family uses WSTMG.

That product-level identification matters for trade procurement because washer selection should be tied to the required fastener, finish & connection rather than appearance alone.

For wider structural fastening assemblies, Hex Bolts provides a logical complementary product pathway.

Trade teams comparing fastening types can also reference the Fastener Guide Bolts Screws Anchors for practical fastening selection context.

Bremick Structural Washer Range at a Glance

Bremick's current product information identifies two core finish options within its metric structural washer offering.

Plain Structural Washers

► Bremick family code: WSTMP
► Thread type: Metric
► Finish: Plain
► Current listed sizes include M12, M16, M20, M22, M24 & M30

Galvanised Structural Washers

► Bremick family code: WSTMG
► Thread type: Metric
► Finish: Galvanised
► Current listed sizes include M12, M16, M20, M24, M30 & M36

Available sizes can vary by product, stock position & range configuration. Always verify the individual product specification before ordering.

Where compatible nuts are required within the fastening system, Hex Nut provides a relevant cross-sell pathway.

Common Applications

Bremick Struct ISO Washers suit appropriately specified structural fastening requirements across construction, fabrication, engineering & industrial environments.

Typical applications can include:

► Structural steel connections
► Steel fabrication
► Machinery mounting
► Equipment installation
► Industrial maintenance
► Building construction
► Steel brackets
► Frames & supports
► Plant installation
► Infrastructure projects
► Workshop fabrication
► Heavy-duty bolted connections
► Mechanical assemblies
► Maintenance shutdowns

Application alone doesn't establish washer suitability.

A washer fitted to workshop equipment can face completely different loading, exposure & specification requirements from a washer used within structural steelwork.

For larger construction projects requiring complementary site products, Material Handling Equipment provides another relevant purchasing pathway.

Product Selection Guide

Structural washer selection should start with the connection specification rather than the washer shelf.

1. Confirm the Structural Fastener

Identify the bolt or threaded component first.

Check:

► Nominal diameter
► Fastener type
► Material
► Finish
► Property class where specified
► Connection type

The washer should then be selected around the requirements of that fastening system.

2. Match the Washer Diameter

Bremick's current structural washer products cover multiple metric sizes.

Examples include:

► M12
► M16
► M20
► M22 within the current plain range
► M24
► M30
► M36 within the current galvanised range

Don't substitute a washer solely because its internal diameter appears to fit.

3. Verify the Required Specification

Structural fastening is specification-sensitive.

Historical Bremick technical catalogue material identifies structural washers against AS 1252-1983. Current projects can be governed by newer standards, engineering specifications or project-specific requirements.

For that reason, don't assume an older catalogue designation automatically establishes compliance for a current project.

Verify the current Bremick technical documentation plus the project's specified standard before installation.

4. Choose the Appropriate Finish

Bremick currently identifies both plain & galvanised metric structural washer products.

Finish selection can depend on:

► Service environment
► Indoor or outdoor exposure
► Moisture
► Corrosion risk
► Connected fastener finish
► Project coating requirements
► Maintenance environment

A washer that fits dimensionally isn't automatically suitable environmentally.

5. Check Washer Dimensions

Confirm more than nominal bolt size.

Check:

► Inside diameter
► Outside diameter
► Thickness
► Flatness
► Required dimensional standard

These characteristics determine how the washer sits & bears within the connection.

6. Match the Complete Fastening Assembly

Structural fastening should be treated as a system:

Bolt → washer → connected material → washer where specified → nut → tightening requirement

The exact configuration depends on the joint design.

For general washer applications outside structural connections, Flat Washer provides a relevant alternative category.

7. Confirm Environmental Compatibility

Outdoor, industrial, coastal, chemical & high-moisture environments can place additional demands on fastener finishes.

Check compatibility across the complete assembly rather than selecting the washer finish independently.

8. Follow the Specified Installation Method

Structural connections can require controlled installation procedures.

Depending on the fastening system, requirements can cover:

► Washer position
► Bolt orientation
► Tightening sequence
► Preload
► Inspection
► Surface preparation
► Replacement criteria
► Installation verification

Never replace the project's specified installation method with a generic torque assumption.

Trade businesses managing repeat fastening requirements can also access Trade support Solutions for broader trade purchasing support.

Expert Tips for Structural Washer Selection & Installation

► Treat every washer as part of the connection. Bolt, nut, washer, finish & joint requirements should be assessed together.
► Verify Bremick product codes when ordering. WSTMP identifies the plain metric structural washer family while WSTMG identifies the galvanised family.
► Check the exact size. Similar-looking washers can have different internal diameters, external diameters & thicknesses.
► Inspect bearing surfaces. Remove contamination, loose scale, burrs or debris that can prevent correct seating.
► Seat the washer flat. Structural washers shouldn't bridge weld spatter, debris or unsuitable surface irregularities.
► Match finishes correctly. Don't casually mix plain, galvanised or other finishes where the connection specification requires a defined fastening system.
► Don't stack washers to correct bolt length. Use the correct fastening configuration.
► Inspect bolt holes. Damaged, oversized or incorrectly formed holes can affect connection behaviour.
► Replace damaged components. Distorted, severely corroded or otherwise compromised washers shouldn't be treated as equivalent to new components.
► Follow specified tightening procedures. Structural connections can require controlled installation rather than general workshop tightening practices.

Industrial maintenance teams operating equipment under demanding conditions can also reference Quarry Crews Crusher Maintenance for broader preventative maintenance context.

Structural Washers vs Standard Flat Washers

A structural washer shouldn't automatically be replaced with a general flat washer simply because both fit over the same nominal bolt diameter.

Potential differences include:

► Dimensional specification
► Inside diameter
► Outside diameter
► Thickness
► Material
► Hardness requirements
► Finish
► Intended fastening system
► Connection specification

Flat Washer remains appropriate for many general fastening applications but structural connections should use the washer specified for that assembly.

Same bolt diameter doesn't mean same washer specification.

Plain vs Galvanised Structural Washers

Choosing between plain & galvanised Bremick structural washers should be driven by the fastening system plus service environment.

Plain Structural Washers

Plain washers can suit assemblies where that finish is specified & environmental exposure doesn't require a galvanised option.

Bremick currently identifies its plain metric structural washer family as WSTMP.

Galvanised Structural Washers

Galvanised washers provide a coated option for applications where the specified fastening system requires that finish.

Bremick currently identifies its galvanised metric structural washer family as WSTMG.

Finish selection shouldn't be made independently from the bolt & nut.

Where the fastening system requires broader corrosion consideration, confirm all connected components before installation.

Avoid These Structural Washer Selection Errors

Structural fastening failures often begin with small specification mistakes.

Avoid:

► Selecting by bolt diameter alone
► Assuming all structural washers are identical
► Substituting standard flat washers without approval
► Ignoring washer thickness
► Ignoring outside diameter
► Mixing incompatible finishes
► Reusing damaged washers
► Installing over contaminated bearing surfaces
► Stacking washers to compensate for incorrect bolt length
► Ignoring project drawings
► Assuming an historical standard automatically applies to current work
► Applying generic torque figures without checking the fastening specification

The safest purchasing workflow remains:

Identify → verify → match → inspect → install to specification

Teams preparing equipment plus consumables before intensive site periods can also use Spring Jobsite Prep Getting Your Gear Ready for broader jobsite preparation guidance.

Inspection Before Installation

Before fitting a structural washer, inspect the complete fastening assembly.

Check for:

► Correct washer size
► Correct finish
► Correct product specification
► Distortion
► Corrosion
► Coating damage
► Burrs
► Contamination
► Damaged bolt threads
► Damaged nuts
► Incorrect hole dimensions
► Poor bearing surfaces
► Unapproved component substitutions

The washer should sit flat against the specified bearing surface.

If the washer rocks, bridges contamination, doesn't sit correctly or appears inconsistent with the fastener specification, stop & verify the assembly before tightening.

Businesses managing recurring workshop or site inventory can use on-site & workshop Services for relevant supply support.

Sidebar
Filter
  • 10
  • 15
  • 20
  • 25
  • 30
  • 50
  • Featured
  • Most relevant
  • Best selling
  • Alphabetically, A-Z
  • Alphabetically, Z-A
  • Price, low to high
  • Price, high to low
  • Date, old to new
  • Date, new to old
Sort

Sort by:

  • Featured
  • Most relevant
  • Best selling
  • Alphabetically, A-Z
  • Alphabetically, Z-A
  • Price, low to high
  • Price, high to low
  • Date, old to new
  • Date, new to old

Showing 0 of 0 products

No products found
Use fewer filters or clear all

Why Buy From Industrial Shed?

Industrial Shed supports Australian builders, fabricators, maintenance teams, workshops & industrial businesses with trade-focused access to fasteners, tools, equipment & related supply solutions.

For structural fastening procurement, that means being able to build the wider connection around the required washer rather than sourcing an isolated component without considering the assembly.

Industrial Shed's trade-focused approach supports:

► Structural fastening requirements
► Workshop procurement
► Construction supply
► Industrial maintenance
► Fabrication requirements
► Repeat trade purchasing
► Complementary fastening products

The selection workflow remains simple:

Confirm the bolt → identify the Bremick washer → verify size → select finish → confirm specification → inspect the joint → install correctly

Specify the Right Washer & Build the Connection Right

✔ Bremick metric structural washer options
✔ Plain & galvanised finishes available across relevant ranges
✔ Sizes covering key structural fastening requirements
✔ Purpose-focused structural fastening selection
✔ Complementary bolts, nuts & fastening hardware
✔ Trade-focused Australian supply support
✔ Specification-first selection approach

Choose Bremick Struct ISO Washers by bolt size, washer dimensions, finish, connection specification & operating environment — then install the complete fastening assembly to the applicable project requirements.

Frequently Asked Questions

They are used within compatible structural bolted assemblies to provide the specified bearing interface beneath a bolt head or nut.

Current Bremick listings include metric structural washer sizes across M12–M36 depending on the product family, finish & specific range.

Yes. Bremick currently lists galvanised metric structural washers under its WSTMG product family.

Yes. Bremick currently lists plain metric structural washers under its WSTMP product family.

No. Structural washers can differ in dimensions, material, hardness, finish & specification. Use the washer required by the structural fastening system.

Don't substitute based purely on diameter. The alternative needs to meet the applicable fastening, engineering & project requirements.

Match the washer to the bolt diameter, required dimensions, finish, fastening specification, connection design & service environment.

Brands

Bremick

Bremick

Solutions Built for Tradies: How Industrial Shed Powers Your Success

At Industrial Shed, we understand that reliable tools are the backbone of any successful project. That’s why we stock durable, high-performance equipment designed to handle tough jobs without breakdowns or delays. Trade professionals across the Mornington Peninsula and Melbourne trust our range for its dependability and long-lasting quality.

As an independent tool retailer, we take pride in offering only the most trusted brands to ensure you get the job done right the first time. Whether you need hand tools, power tools, or workshop essentials, our carefully curated selection guarantees reliability, so you can focus on your work with confidence.

Struggling to locate specialised tools for your trade? Industrial Shed has you covered. Our extensive range ensures trade professionals across the Mornington Peninsula and Melbourne have access to niche products without the hassle of searching multiple suppliers. From unique fasteners to specialty power tools, we make it simple to find exactly what you need.

As a local, independent tool retailer, we understand the challenges tradies face in sourcing specific equipment. Our team is here to provide expert advice and personalised support, ensuring you have the right tools for the job—every time.

At Industrial Shed, we know the trade industry inside out. As an independent tool shop based on the Mornington Peninsula, we are deeply familiar with the needs of local tradies and construction professionals. Our curated selection of tools is designed to meet the demands of both large-scale projects and everyday trade work.

Our team provides tailored advice and practical solutions to ensure you’re equipped with the right tools and equipment for every job. With years of experience serving Melbourne and Mornington Peninsula professionals, we are your trusted partner for all things trade.

At Industrial Shed, we simplify your workday by offering everything you need under one roof. From hand tools and power tools to fasteners, workwear, and safety gear, our one-stop shop helps trade professionals save valuable time. No more running between multiple suppliers—we have it all.

Serving the Mornington Peninsula and Melbourne regions, we take pride in making your tool shopping experience efficient and straightforward. As an independent retailer, we focus on delivering high-quality products with the service and support you can rely on.

Your safety is our priority at Industrial Shed. We stock a full range of durable workwear, safety equipment, and PPE to keep you and your team protected on-site. From hi-vis clothing to helmets and gloves, our collection is designed with the toughest conditions in mind.

Trade professionals on the Mornington Peninsula and in Melbourne trust us for reliable safety solutions. With expert advice and a commitment to quality, we make sure you have the gear you need to stay safe while getting the job done.

Demanding projects require tools you can trust. At Industrial Shed, our heavy-duty tools and equipment are built to handle the toughest challenges on any worksite. Whether it’s power tools, concrete tools, or lifting gear, we’ve got the equipment you need to perform.

Serving trade professionals across the Mornington Peninsula and Melbourne, we specialise in high-performance tools that stand up to wear and tear. As an independent tool retailer, we provide personalised service to ensure you have the strength and reliability to succeed.

At Industrial Shed, we believe that balancing cost and performance shouldn’t mean compromising on quality. Our range of high-performance tools is competitively priced to ensure Melbourne and Mornington Peninsula tradies stay within budget while using the best gear.

From hand tools to power tools, we stock trusted brands that deliver value and durability. As an independent retailer, we’re committed to providing trade professionals with reliable tools that won’t break the bank—or let you down.

At Industrial Shed, we understand the importance of reliable power on the job. Our range of generators and portable power solutions is designed to keep your tools and equipment running smoothly, no matter where you’re working.

From small repairs to large-scale projects across the Mornington Peninsula and Melbourne, our power solutions are trusted by trade professionals. As your local tool shop, we offer expert advice to ensure you’re equipped with the right tools for uninterrupted productivity.

Avoid costly project delays with Industrial Shed’s consistently stocked inventory. We ensure trade professionals across the Mornington Peninsula and Melbourne have quick access to the tools, fasteners, and supplies they need to get the job done on time.

As an independent retailer, we pride ourselves on being a reliable partner for tradies, offering high-quality products and personalised service. When you shop with us, you’ll never have to worry about supply shortages holding you back.

At Industrial Shed, we’re more than just a tool retailer—we’re your partner in productivity. Serving Melbourne and the Mornington Peninsula, we provide trade professionals with the trusted tools, advice, and support they need to succeed on every project.

Our independent approach ensures we prioritise your needs, from reliable product recommendations to tailored solutions. With our high-quality gear and expert service, you can count on us to help you work smarter and achieve more.