-
KSM Bearing - 5204-2RS-JAP Double Row Angular Contact Ball Bearing 20mm ID x 47mm OD x 20.6mm W | 5204-2RS-JAP5204-2RS-JAP
- $22.42
- $22.42
- Unit price
- per
Replacing an angular contact ball bearing? Getting the dimensions right is only the beginning. The correct bearing must also match the machine's axial load direction, contact angle, arrangement, clearance or preload requirements & operating speed.
Angular contact ball bearings are designed to accommodate combined radial & axial loads within their specified ratings. Their internal geometry makes them useful in compatible pumps, gearboxes, machine tools, spindles & industrial rotating equipment where controlled shaft positioning matters.
Explore Industrial Shed's Angular Contact Ball Bearings collection to compare replacement designs, bearing series & manufacturer specifications. Whether you're identifying a worn bearing or planning an equipment overhaul, accurate selection helps avoid unsuitable substitutions & repeat repairs.
The first question is simple: Which forces act on the shaft & in which direction?
Different angular contact bearing configurations support different load arrangements.
Single-row angular contact ball bearings: accommodate combined radial & axial loads, with axial loading primarily supported in one direction.
Double-row angular contact ball bearings: provide a two-row arrangement capable of supporting specified axial loads in both directions.
Paired angular contact bearings: use approved configurations to control shaft location, axial loading & stiffness.
Precision angular contact bearings: suit applications requiring specified running accuracy, speed capability or rigidity.
Sealed angular contact bearings: incorporate a defined sealing arrangement for suitable operating conditions.
Open angular contact bearings: may be used with specified lubrication systems or separate sealing arrangements.
The original equipment design determines the correct configuration. A bearing with matching outside dimensions may still have an unsuitable contact angle or preload class.
Have you found a bearing marked 7005, 7205 or 7305?
These designations can identify different angular contact bearing dimensional series. The series influences the bearing's geometry, but the full manufacturer code is needed to establish its precise construction.
A useful replacement process starts with:
Bearing series: identify the complete dimensional family.
Bore diameter: confirm the shaft fit.
Outside diameter: match the housing.
Bearing width: check installation space.
Contact angle: verify the intended axial-load characteristics.
Precision class: confirm required running accuracy.
Preload or clearance designation: match the machine's specified arrangement.
Cage construction: verify where relevant.
Seal configuration: confirm protection & lubrication requirements.
Manufacturer suffixes: identify additional design features.
A 70-series bearing is not automatically interchangeable with a 72-series or 73-series product, even if the bore diameter is the same.
For replacements, use the complete original designation wherever possible.
A bearing's contact angle influences how it accommodates axial loading relative to radial loading.
In general, a larger contact angle can increase axial-load capability relative to radial-load capability, depending on the bearing's complete design.
Smaller contact angles may be relevant to certain higher-speed applications, while larger angles may suit arrangements with more significant thrust loading.
However, the contact angle alone cannot determine suitability.
Load ratings, speed limits, lubrication, cage construction, thermal conditions & bearing arrangement must all be considered.
Practical buying tip: If the original bearing designation includes a contact-angle suffix, preserve that specification unless the equipment manufacturer approves a change.
Which configuration suits your machine?
A single-row angular contact bearing primarily accommodates axial loading in one direction. Machinery requiring axial location in both directions may use a specified opposed pair.
A double-row angular contact bearing incorporates two rows within one assembly, allowing it to accommodate axial loads in both directions within its rated limits.
The difference affects installation space, load handling & shaft support.
Do not replace a paired single-row arrangement with a double-row unit solely because it appears more convenient. The equipment's load path & mounting geometry must support the change.
Bearing arrangement can determine how accurately a shaft is located under operating loads.
Back-to-back arrangements provide a comparatively wide effective support spread & are used in specified applications requiring axial location & moment stiffness.
Face-to-face arrangements have a different support geometry that can suit particular shaft or housing conditions.
Tandem arrangements allow bearings to share axial loading in one direction, usually requiring an additional arrangement to accommodate reverse axial forces.
These are engineered configurations, not interchangeable installation preferences.
If the machine uses a matched bearing set, preserve the manufacturer's specified orientation, preload class & assembly method.
Why can a new bearing run hotter than the one it replaced?
Incorrect preload is one possible explanation.
Preload introduces a controlled internal loading condition in suitable bearing arrangements. It can improve specified stiffness & shaft positioning, but excessive preload may increase friction, operating temperature & wear.
Insufficient preload may fail to deliver the intended rigidity.
The final operating condition is influenced by shaft fits, housing fits, thermal expansion & installation procedures.
For precision spindles or high-speed equipment, use the manufacturer's specified matched set, spacers & preload method. Do not adjust precision bearing preload by feel.
Different machines place different demands on bearing performance.
Pump assemblies may generate axial forces that require a suitable thrust-capable bearing arrangement.
Machine tool spindles can require controlled stiffness, running accuracy & speed capability.
Gearboxes may produce combined radial & axial loads, particularly where the gear arrangement generates thrust.
Industrial rotating equipment may require precise shaft location under variable temperature & loading conditions.
For each application, compare the bearing's full technical specification against the original equipment documentation.
A product described as a precision bearing is not automatically suitable for every precision application.
Both designs support rotating shafts, but their intended load characteristics differ.
Deep groove ball bearings are widely used for general radial-load applications & can accommodate specified axial loads.
Angular contact ball bearings are designed around a defined contact angle & combined loading characteristics.
For general radial bearing applications, explore Deep Groove Ball Bearings.
Where the application primarily requires axial load support, compare Thrust Ball Bearings.
For a wider selection of bearing families, browse Ball Bearings.
The right replacement is determined by load direction, bearing arrangement & operating conditions—not simply dimensional similarity.
A technically correct bearing can still fail prematurely if installed incorrectly.
Inspect shafts, housings, shoulders, spacers & retaining components before fitting a replacement.
Confirm the required orientation of single-row bearings, especially where the machine uses a paired arrangement.
Use appropriate fitting tools & apply force through the ring being installed. Never transmit installation force through the rolling elements.
Follow the manufacturer's lubrication specifications for grease or oil type, quantity & maintenance intervals.
After installation, monitor operating temperature, vibration & noise according to the equipment's commissioning procedure.
Isolate machinery before servicing rotating assemblies.
Confirm the complete bearing designation & contact angle.
Preserve the specified bearing arrangement & orientation.
Follow approved preload or clearance procedures.
Inspect shafts, housings, spacers & retaining components.
Avoid transmitting installation force through rolling elements.
Use the specified lubricant & maintenance interval.
Obtain qualified advice for high-speed spindles or safety-critical equipment.
Industrial Shed supplies specialised bearing components for Australian machinery maintenance, workshop repairs & industrial applications.
Compare the complete manufacturer's designation, bearing series, dimensions, contact angle, precision class & operating ratings before purchasing.
Where an alternative manufacturer is being considered, confirm full technical equivalence rather than assuming that matching dimensions guarantee interchangeability.
They accommodate combined radial & axial loads within their specified ratings. Applications can include pumps, machine tools, gearboxes & other rotating equipment.
These identify different angular contact bearing dimensional series. Their full designations, dimensions & manufacturer specifications determine suitability.
Not automatically. Their installation arrangements, load handling & shaft-support requirements differ. Follow the original equipment design.
Correct preload can provide specified stiffness & shaft positioning. Incorrect preload can increase friction, temperature or unwanted movement.
Industrial Shed supplies bearings & power transmission components to Australian workshops, machinery maintenance teams & industrial buyers. Review Shipping & Delivery for delivery arrangements. For replacement-component enquiries, explore Warranty & Parts Support.
They’re used in manufacturing, mining, motorsport, CNC machinery, HVAC systems, and more—anywhere speed and thrust load handling matter.
Yes. We supply matched bearing sets for paired or back-to-back use, ensuring optimum performance and shaft alignment.
We carry a wide range of sizes, cage types, and temperature ratings. Let us know your spec and we’ll supply fast.
Replacing an angular contact ball bearing? Getting the dimensions right is only the beginning. The correct bearing must also match the machine's axial load direction, contact angle, arrangement, clearance or preload requirements & operating speed.
Angular contact ball bearings are designed to accommodate combined radial & axial loads within their specified ratings. Their internal geometry makes them useful in compatible pumps, gearboxes, machine tools, spindles & industrial rotating equipment where controlled shaft positioning matters.
Explore Industrial Shed's Angular Contact Ball Bearings collection to compare replacement designs, bearing series & manufacturer specifications. Whether you're identifying a worn bearing or planning an equipment overhaul, accurate selection helps avoid unsuitable substitutions & repeat repairs.
The first question is simple: Which forces act on the shaft & in which direction?
Different angular contact bearing configurations support different load arrangements.
Single-row angular contact ball bearings: accommodate combined radial & axial loads, with axial loading primarily supported in one direction.
Double-row angular contact ball bearings: provide a two-row arrangement capable of supporting specified axial loads in both directions.
Paired angular contact bearings: use approved configurations to control shaft location, axial loading & stiffness.
Precision angular contact bearings: suit applications requiring specified running accuracy, speed capability or rigidity.
Sealed angular contact bearings: incorporate a defined sealing arrangement for suitable operating conditions.
Open angular contact bearings: may be used with specified lubrication systems or separate sealing arrangements.
The original equipment design determines the correct configuration. A bearing with matching outside dimensions may still have an unsuitable contact angle or preload class.
Have you found a bearing marked 7005, 7205 or 7305?
These designations can identify different angular contact bearing dimensional series. The series influences the bearing's geometry, but the full manufacturer code is needed to establish its precise construction.
A useful replacement process starts with:
Bearing series: identify the complete dimensional family.
Bore diameter: confirm the shaft fit.
Outside diameter: match the housing.
Bearing width: check installation space.
Contact angle: verify the intended axial-load characteristics.
Precision class: confirm required running accuracy.
Preload or clearance designation: match the machine's specified arrangement.
Cage construction: verify where relevant.
Seal configuration: confirm protection & lubrication requirements.
Manufacturer suffixes: identify additional design features.
A 70-series bearing is not automatically interchangeable with a 72-series or 73-series product, even if the bore diameter is the same.
For replacements, use the complete original designation wherever possible.
A bearing's contact angle influences how it accommodates axial loading relative to radial loading.
In general, a larger contact angle can increase axial-load capability relative to radial-load capability, depending on the bearing's complete design.
Smaller contact angles may be relevant to certain higher-speed applications, while larger angles may suit arrangements with more significant thrust loading.
However, the contact angle alone cannot determine suitability.
Load ratings, speed limits, lubrication, cage construction, thermal conditions & bearing arrangement must all be considered.
Practical buying tip: If the original bearing designation includes a contact-angle suffix, preserve that specification unless the equipment manufacturer approves a change.
Which configuration suits your machine?
A single-row angular contact bearing primarily accommodates axial loading in one direction. Machinery requiring axial location in both directions may use a specified opposed pair.
A double-row angular contact bearing incorporates two rows within one assembly, allowing it to accommodate axial loads in both directions within its rated limits.
The difference affects installation space, load handling & shaft support.
Do not replace a paired single-row arrangement with a double-row unit solely because it appears more convenient. The equipment's load path & mounting geometry must support the change.
Bearing arrangement can determine how accurately a shaft is located under operating loads.
Back-to-back arrangements provide a comparatively wide effective support spread & are used in specified applications requiring axial location & moment stiffness.
Face-to-face arrangements have a different support geometry that can suit particular shaft or housing conditions.
Tandem arrangements allow bearings to share axial loading in one direction, usually requiring an additional arrangement to accommodate reverse axial forces.
These are engineered configurations, not interchangeable installation preferences.
If the machine uses a matched bearing set, preserve the manufacturer's specified orientation, preload class & assembly method.
Why can a new bearing run hotter than the one it replaced?
Incorrect preload is one possible explanation.
Preload introduces a controlled internal loading condition in suitable bearing arrangements. It can improve specified stiffness & shaft positioning, but excessive preload may increase friction, operating temperature & wear.
Insufficient preload may fail to deliver the intended rigidity.
The final operating condition is influenced by shaft fits, housing fits, thermal expansion & installation procedures.
For precision spindles or high-speed equipment, use the manufacturer's specified matched set, spacers & preload method. Do not adjust precision bearing preload by feel.
Different machines place different demands on bearing performance.
Pump assemblies may generate axial forces that require a suitable thrust-capable bearing arrangement.
Machine tool spindles can require controlled stiffness, running accuracy & speed capability.
Gearboxes may produce combined radial & axial loads, particularly where the gear arrangement generates thrust.
Industrial rotating equipment may require precise shaft location under variable temperature & loading conditions.
For each application, compare the bearing's full technical specification against the original equipment documentation.
A product described as a precision bearing is not automatically suitable for every precision application.
Both designs support rotating shafts, but their intended load characteristics differ.
Deep groove ball bearings are widely used for general radial-load applications & can accommodate specified axial loads.
Angular contact ball bearings are designed around a defined contact angle & combined loading characteristics.
For general radial bearing applications, explore Deep Groove Ball Bearings.
Where the application primarily requires axial load support, compare Thrust Ball Bearings.
For a wider selection of bearing families, browse Ball Bearings.
The right replacement is determined by load direction, bearing arrangement & operating conditions—not simply dimensional similarity.
A technically correct bearing can still fail prematurely if installed incorrectly.
Inspect shafts, housings, shoulders, spacers & retaining components before fitting a replacement.
Confirm the required orientation of single-row bearings, especially where the machine uses a paired arrangement.
Use appropriate fitting tools & apply force through the ring being installed. Never transmit installation force through the rolling elements.
Follow the manufacturer's lubrication specifications for grease or oil type, quantity & maintenance intervals.
After installation, monitor operating temperature, vibration & noise according to the equipment's commissioning procedure.
Isolate machinery before servicing rotating assemblies.
Confirm the complete bearing designation & contact angle.
Preserve the specified bearing arrangement & orientation.
Follow approved preload or clearance procedures.
Inspect shafts, housings, spacers & retaining components.
Avoid transmitting installation force through rolling elements.
Use the specified lubricant & maintenance interval.
Obtain qualified advice for high-speed spindles or safety-critical equipment.
Industrial Shed supplies specialised bearing components for Australian machinery maintenance, workshop repairs & industrial applications.
Compare the complete manufacturer's designation, bearing series, dimensions, contact angle, precision class & operating ratings before purchasing.
Where an alternative manufacturer is being considered, confirm full technical equivalence rather than assuming that matching dimensions guarantee interchangeability.
They accommodate combined radial & axial loads within their specified ratings. Applications can include pumps, machine tools, gearboxes & other rotating equipment.
These identify different angular contact bearing dimensional series. Their full designations, dimensions & manufacturer specifications determine suitability.
Not automatically. Their installation arrangements, load handling & shaft-support requirements differ. Follow the original equipment design.
Correct preload can provide specified stiffness & shaft positioning. Incorrect preload can increase friction, temperature or unwanted movement.
Industrial Shed supplies bearings & power transmission components to Australian workshops, machinery maintenance teams & industrial buyers. Review Shipping & Delivery for delivery arrangements. For replacement-component enquiries, explore Warranty & Parts Support.
Thanks for subscribing!
This email has been registered!