► Action | Torque Multipliers & Accessories

Multiply Torque, Break Free Seized Fasteners & Control Heavy Load Fastening Seized fasteners don’t move with standard tools — they fail, snap or stall the job completely. Industrial Shed’s action torque multipliers & accessories Australia range is built for tradies who need controlled, high-output force without risking damage to tools,...

Multiply Torque, Break Free Seized Fasteners & Control Heavy Load Fastening

Seized fasteners don’t move with standard tools — they fail, snap or stall the job completely. Industrial Shed’s action torque multipliers & accessories Australia range is built for tradies who need controlled, high-output force without risking damage to tools, threads or components. Whether you're using a manual torque multiplier on heavy equipment or applying a high torque multiplier for structural fastening, the right setup delivers serious force with precision control.

Across workshops & job sites, relying on brute force or undersized tooling leads to broken studs, rounded fasteners & extended downtime. A properly engineered torque multiplier tool uses mechanical advantage to deliver consistent torque multiplication, allowing you to remove seized bolts, tighten critical fasteners & maintain accuracy under load. This reduces operator strain, protects hardware & ensures reliable outcomes in high-pressure environments.

Integrated setups using Socket Sets, supported by Torque Wrenches & reinforced with Ratchets & Spanners allow these systems to perform under pressure. Efficient workflow is maintained when combined with Tool Storage, while demanding environments often benefit from pairing with Hydraulic Equipment. For correct application, Fastener Guide Bolts Screws Anchors outlines torque requirements, while Kincrome vs SP Tools: Workshop Hand Tool Showdown compares durability across real trade use.

Designed for Trade, Workshop & Industry

High-torque applications demand control, consistency & equipment that won’t fail under pressure.

  • Multiplies torque output using gear-driven torque multiplication systems

  • Reduces risk of snapped fasteners during removal or tightening

  • Maintains steady, controlled output with high torque multiplier setups

  • Built for heavy-duty mechanical & industrial environments

  • Designed to perform under repeated high-load torque conditions

Shop Torque Multipliers & Accessories by Category

Torque Multipliers

Heavy-duty torque multiplier tools designed to increase output force for demanding fastening.

► Best for breaking seized fasteners & wheel nuts under extreme load
► Multiplies torque using internal gear systems for maximum output
► Preferred for heavy machinery, trucks & industrial maintenance

Reaction Bars & Arms

Stabilisation components essential for safe torque multiplier Australia operation.

► Used to counteract rotational force safely during torque multiplication
► Prevents operator injury under high torque loads
► Critical for maintaining control in industrial applications

Drive Adapters & Accessories

Components that expand compatibility across different drive systems.

► Enables use with multiple drive sizes including 1/2 & 3/4 systems
► Maintains torque transfer without loss
► Ideal for flexible workshop setups

Heavy-Duty Socket Accessories

Reinforced components built to handle extreme high-torque output.

► Designed for high-torque fastening environments
► Prevents socket failure under load
► Used in conjunction with torque multiplier systems

For heavy-load fastening setups, pairing with Shop Presses & Vices improves stability during high-force applications, while using Power Tool Accessories supports broader tool compatibility across fastening systems.

Why Tradies Choose Torque Multipliers & Accessories

High-torque fastening isn’t just about force — it’s about controlled torque multiplication, safety & avoiding costly failures under load.

  • Delivers consistent output using precision torque multiplier systems

  • Prevents snapped studs caused by uncontrolled force

  • Reduces operator fatigue when using manual torque multiplier setups

  • Improves control across heavy-duty fastening applications

  • Speeds up removal of seized bolts, nuts & fixings

  • Built for durability in industrial torque environments

For accurate final tightening after torque multiplication, combining with calibrated torque systems ensures fasteners are secured without overloading or failure.

 

Sidebar

Product Type

Size

Brands

Price

$
to
$
Filter
  • 10
  • 15
  • 20
  • 25
  • 30
  • 50
  • Featured
  • Most relevant
  • Best selling
  • Alphabetically, A-Z
  • Alphabetically, Z-A
  • Price, low to high
  • Price, high to low
  • Date, old to new
  • Date, new to old
Sort

Sort by:

  • Featured
  • Most relevant
  • Best selling
  • Alphabetically, A-Z
  • Alphabetically, Z-A
  • Price, low to high
  • Price, high to low
  • Date, old to new
  • Date, new to old
  • Action Repair Kit Suits
    Action - Repair Kit Suits | MT-2004RK
    Action - Repair Kit Suits | MT-2004RK The Action Torque Multiplier Repair Kit (MT-2004RK) contains the replacement internal components for servicing compatible Action torque multiplier units. A cost-effective maintenance solution to restore full torque multiplier performance without replacing the entire unit. Available Australia-wide. ►...
    $723.04
    $0.00
    $723.04
  • Action Repair Kit Suits
    Action - Repair Kit Suits | MT-1016RK
    Action - Repair Kit Suits | MT-1016RK The Action Torque Multiplier Repair Kit (MT-1016RK) contains the replacement internal components for servicing compatible Action torque multiplier units. A cost-effective maintenance solution to restore full torque multiplier performance without replacing the entire unit. Available Australia-wide. ►...
    $955.05
    $0.00
    $955.05
  • Action Repair Kit Suits
    Action - Repair Kit Suits | MT-1012RK
    Action - Repair Kit Suits | MT-1012RK The Action Torque Multiplier Repair Kit (MT-1012RK) contains the replacement internal components for servicing compatible Action torque multiplier units. A cost-effective maintenance solution to restore full torque multiplier performance without replacing the entire unit. Available Australia-wide. ►...
    $873.83
    $0.00
    $873.83
  • Action Repair Kit Suits
    Action - Repair Kit Suits | MT-1009RK
    Action - Repair Kit Suits | MT-1009RK The Action Torque Multiplier Repair Kit (MT-1009RK) contains the replacement internal components for servicing compatible Action torque multiplier units. A cost-effective maintenance solution to restore full torque multiplier performance without replacing the entire unit. Available Australia-wide. ►...
    $668.60
    $0.00
    $668.60
  • Action 3/4" Drive 1500nm Torque Multipler Kit (1:9 Ratio)
    Action - 3/4" Drive 1500nm Torque Multipler Kit (1:9 Ratio) | MT-1009S
    Action - 3/4" Drive 1500nm Torque Multipler Kit (1:9 Ratio) | MT-1009S The Action 3/4" Drive Torque Multiplier Kit (1:9 Ratio) — 1500NM (MT-1009S) multiplies input torque to achieve high fastener torque values without a large impact wrench. Designed for heavy vehicle wheel nuts,...
    $1,343.14
    $0.00
    $1,343.14
  • Action 13 Pc Imperial Torqrate Socket Set
    Action - 13 Pc Imperial Torqrate Socket Set | FOAM10
    Action - 13pce Imperial Torqrate Socket Set | FOAM10 The Action Drive 6-Point Torqrate Impact Socket (FOAM10) features a precision-controlled torque release mechanism that limits overtightening on sensitive fasteners, protecting components and maintaining correct assembly torque. Built from chrome molybdenum alloy steel for automotive...
    $415.46
    $415.46
  • Action 12 Pc Metric Torqrate Socket Set
    Action - 12 Pc Metric Torqrate Socket Set | FOAM09
    Action - 12pce Metric Torqrate Socket Set | FOAM09 The Action Drive 6-Point Torqrate Impact Socket (FOAM09) features a precision-controlled torque release mechanism that limits overtightening on sensitive fasteners, protecting components and maintaining correct assembly torque. Built from chrome molybdenum alloy steel for automotive...
    $415.46
    $415.46
  • Action 1" Drive 2500nm Torque Multiplier Kit (1:4 Ratio)
    Action - 1" Drive 2500nm Torque Multiplier Kit (1:4 Ratio) | MT-2004S
    Action - 1" Drive 2500nm Torque Multiplier Kit (1:4 Ratio) | MT-2004S The Action 1" Drive Torque Multiplier Kit (1:4 Ratio) — 2500NM (MT-2004S) multiplies input torque to achieve high fastener torque values without a large impact wrench. Designed for heavy vehicle wheel nuts,...
    $1,415.78
    $0.00
    $1,415.78
  • Action 1" Drive 2500nm Torque Multiplier Kit (1:16 Ratio)
    Action - 1" Drive 2500nm Torque Multiplier Kit (1:16 Ratio) | MT-1016S
    Action - 1" Drive 2500nm Torque Multiplier Kit (1:16 Ratio) | MT-1016S The Action 1" Drive Torque Multiplier Kit (1:16 Ratio) — 2500NM (MT-1016S) multiplies input torque to achieve high fastener torque values without a large impact wrench. Designed for heavy vehicle wheel nuts,...
    $1,700.11
    $0.00
    $1,700.11
  • Action 1" Drive 2000nm Torque Multiplier Kit (1:12 Ratio)
    Action - 1" Drive 2000nm Torque Multiplier Kit (1:12 Ratio) | MT-1012S
    Action - 1" Drive 2000nm Torque Multiplier Kit (1:12 Ratio) | MT-1012S The Action 1" Drive Torque Multiplier Kit (1:12 Ratio) — 2000NM (MT-1012S) multiplies input torque to achieve high fastener torque values without a large impact wrench. Designed for heavy vehicle wheel nuts,...
    $1,560.95
    $0.00
    $1,560.95

Built for Real Trade Applications

Automotive & Mechanical

Working on trucks & heavy vehicles requires torque multiplier setups to safely remove wheel nuts & high-torque fasteners without damaging threads.

Construction & Site Work

Structural fastening relies on high torque systems to ensure bolts are tightened correctly without risking joint failure.

Engineering & Fabrication

Precision assembly depends on controlled torque multiplication to avoid over-tightening or component distortion.

Maintenance & Industrial

Machinery servicing often requires manual torque multiplier systems to break seized fasteners without excessive force or disassembly.

How to Choose the Right Torque Multipliers & Accessories

  • Select torque multiplier ratio based on required output torque
  • Choose manual systems for controlled applications
  • Match drive sizes with your socket system
  • Use reaction arms to stabilise high torque setups
  • Ensure compatibility with existing tools

Trade Tip

Applying torque without calculating multiplier ratio can snap studs instantly — always confirm output torque before applying force.

Best Selling Torque Multipliers & Accessories

  • Manual torque multipliers
  • Reaction arms & bars
  • Drive adapters
  • Heavy-duty socket accessories

Why Buy Industrial Shed Torque Multipliers & Accessories from Industrial Shed

Industrial Shed supplies high-performance torque multipliers & accessories Australia built for serious torque, reliability & real trade conditions.

✔ Engineered for high torque applications
✔ Reduces fastener damage & operator strain
✔ Compatible with professional tool systems
✔ Built for durability under extreme load
✔ Fast dispatch to minimise downtime
✔ Trusted by Australian tradies & industrial operators

Apply Massive Torque Without Losing Control

High-load fastening demands precision, safety & reliable torque delivery. Industrial Shed’s torque multiplier tools provide controlled torque multiplication so you can remove seized fasteners, tighten critical joints & complete heavy-duty work efficiently.

Order now with Same day dispatch & keep your equipment performing with Tool & equipment Care — built for tradies who demand precision, safety & performance.

Frequently Asked Questions

A torque multiplier increases torque using internal gear reduction.

It multiplies input force to produce higher output torque.

Use for seized fasteners or high-torque applications.

Yes — ideal for loosening over-tightened wheel nuts.

The ratio defines how much torque is multiplied.

Yes — incorrect use can snap bolts or damage threads.

Brands

Action

Action