Soudal - Soudafix VE400-SF 380ml | 117475

Secure Heavy‑Duty Anchoring with Confidence

The Soudafix VE400‑SF 380 ml is the premium two‑component vinylester resin anchor designed for professionals requiring reliable, high‑performance fixing in cracked or uncracked concrete and masonry.

Key Features

• Two‑component vinylester, styrene‑free formula – low odour, environmentally conscious
• European Technical Approval ETA Option 1 – suitable for cracked and uncracked concrete (M8–M30 threaded rods; Ø8–Ø32 rebar)
• Fire resistance class F120 (M8–M30) – safe for critical structural applications
• Fast curing – even in damp drill‑holes, underwater, or in temperatures down to –10 °C
• Reusable cartridge – just swap the static mixer for fresh batches
• Watertight, high chemical resistance – ideal for aggressive environments (e.g., chloride exposure)
• Pressure‑free anchoring – perfect near edges or sensitive substrates
• Indoor air emission class A+ – meets strict VOC standards

Technical Specifications

• Base: Vinylester resin (styrene‑free)
• Volume: 380 ml cartridge (product code 117475)
• Threaded rod capacity: M8–M30
• Rebar diameter: Ø8–Ø32 mm
• Operating temperature: –10 °C to +40 °C (applicable range)
• Fire rating: F120
• Approval: ETA Option 1 for cracked/uncracked concrete
• Indoor air impact: Emission class A+

Typical Applications

• Structural anchoring: bolt fixings, profile supports, façade mounts
• Rebar dowelling in structural repair or reinforcement
• Heavy machinery and anchor point installations
• Edge fixings and close‑to‑edge applications with no expansion stress
• Underwater and damp‑hole fixings (basements, tunnels, bridges)
• Repair mortar applications in masonry work

Why Choose Soudafix VE400‑SF?

Soudal is Europe’s leading independent specialist in sealants, adhesives, foams, and chemical anchors. The VE400‑SF resin offers tradespeople unmatched reliability—boasting fast, pressure‑free setting, certification for cracked concrete, high fire & chemical resistance, and low‑VOC content—all in a reusable cartridge to reduce waste and cost.

Packaging Information

• Single 380 ml grey cartridge per box

Important Notes & Limitations

• Ensure thorough hole drilling and cleaning (brush + air) for optimal bonding
• Discard first 10 cm of extruded resin until uniform dark‑grey mix appears
• Allow full cure before loading; excess hardened resin must be mechanically removed
• Pre‑test on porous substrates (e.g., natural stone) to avoid staining
• Wear protective gear—may cause skin/eye irritation (see SDS and TDS)

Australian Trade Testimonials:

“Reliable anchoring even in damp conditions – saves time and hassle on site.”
“Consistency in fast setting has reduced our hold‑up times dramatically.”

⚡ Limited stock available—order now from Industrial Shed!