Soudal - Gun Grade Flexible Insulation Foam 750ml | 117472

Seal & Insulate with Flexibility

The Soudal – Gun Grade Flexible Insulation Foam 750 ml (117472) from Industrial Shed is the go‑to solution for trade professionals on the Mornington Peninsula seeking a reliable, elastic and long‑lasting seal for dynamic joints and insulation projects.

Key Features

• Up to 3× more flexible than standard PU foam – ideal for moving joints 
• Minimal post‑expansion and shrinkage (< 5 %) ensure a consistent finish 
• Excellent thermal (λ = 0.035 W/m·K) and acoustic insulation (62 dB) 
• Airtight with high water‑vapour permeability (µ = 20)
• Duravalve system maintains optimal yield over shelf life
• Easy to dose via foam applicator gun (gun grade format)

Technical Specifications

• Basis: Polyurethane, moisture curing 
• Volume: 750 ml can yields ~30 L cured foam (≈ 21 m joint fill) 
• Density: ~25 kg/m³ (free‑foam) 
• Curing times: Skin ~7 min, cuttable ~40 min (EN 17333)
• Temperature resistance: –40 °C to +90 °C (up to +120 °C short‑term) 
• Elongation at break: ~25 % tensile 
• Compression set: ~6 % after 50 % compression
• Compressive strength: ~15 kPa; shear ~25 kPa; tensile ~42 kPa

Typical Applications

• Sealing and insulating window and door frames – ideal for expansion joints
• Filling cavities and sealing roof penetrations
• Soundproofing corridors, ducts and mechanical enclosures
• Thermal insulation in HVAC and refrigeration settings
• Flexible bonding on panel joinery and vibrating structures

Why Choose This Product

Engineered by Soudal, a global sealants leader, this foam delivers unparalleled elasticity, energy‑efficient insulation and market‑leading durability. Its airtight and vapour‑open properties help prevent moisture build‑up and maintain building envelope health—critical in Australia's varied climate.

Packaging Information

Supplied in a 750 ml aerosol can fitted with a Gun Adaptor. Packaged 12 units per box. Shelf life ≥ 24 months when stored upright between +5 °C and +25 °C :contentReference[oaicite:15]{index=15}.

Important Notes & Limitations

• Not UV‑resistant — protect cured foam with paint or sealant
• Not recommended for application on PE, PP, PTFE surfaces 
• Use with foam gun; shake can ≥ 20 s before and during use
• Work within +5 °C to +35 °C; moisten surfaces to aid curing
• Clean uncured foam with Soudal Foam Cleaner or acetone; remove cured material mechanically or with PU Remover :contentReference[oaicite:17]{index=17}
• Wear protective gloves/goggles — refer SDS

Australian Trade Testimonials:

"This foam holds its flexibility even under thermal cycling—ideal for coastal builds." — HVAC installer, QLD

"We trust Soudal for its reliable curing and minimal waste on large window installations." — Joinery contractor, VIC

⚡ Limited stock available—order now from Industrial Shed!