Bearing IKO Shell Type Needle Roller 2RS 30mm ID x 37mm OD x 16mm W | TLA3016UU/IKO

Bearing IKO Shell Type Needle Roller 2RS 30mm ID x 37mm OD x 16mm W | TLA3016UU/IKO

$24.60
$24.60
Vendor: Finer Power Transmissions
SKU: TLA3016UU/IKO

IKO TLA3016UU — shell type (drawn cup) needle roller bearing (30mm ID x 37mm OD x 16mm W). Built for compact gear trains, pivots and transmissions where a ball bearing will not fit. Stocked at Industrial Shed with trade pricing and fast...

Read moreRead less

IKO TLA3016UU Shell Type (Drawn Cup) Needle Roller Bearing – 30mm ID x 37mm OD x 16mm W

IKO TLA3016UU — shell type (drawn cup) needle roller bearing (30mm ID x 37mm OD x 16mm W). Built for compact gear trains, pivots and transmissions where a ball bearing will not fit. Stocked at Industrial Shed with trade pricing and fast Australia-wide dispatch.

► Key Features

  • Thin drawn-cup outer ring — presses straight into the housing with no shoulder or circlip needed
  • Open both ends
  • Runs directly on a hardened and ground shaft, or on a matching inner ring
  • Sealed both sides — keeps grease in and dirt out
  • Needle rollers give high radial load capacity in a very small cross-section

► Technical Specifications

  • Part Number: TLA3016UU
  • Bore (ID): 30mm
  • Outside Diameter (OD): 37mm
  • Width: 16mm
  • Type: Shell Type (Drawn Cup) Needle Roller Bearing
  • Brand: IKO

► Typical Applications

Transmissions, universal joints, swing arms, hydraulic motors, agricultural pivots and machine tools.

► Why Tradies Grab This

When there is no room for a ball bearing, a needle roller carries more load in a fraction of the section.

► Industrial Shed’s Trade Guarantee

  • We Stand By Our Gear: if it is not tough enough for the job, we will make it right.
  • Loyalty Matters: trade account pricing for repeat customers.
  • Real Support: talk to our crew — people who work on this gear, not a call centre.
  • Fast Dispatch: stocked lines out the door quickly.
Product weight
35 g
Category
Bearings
Shipping calculated at checkout

Enter your delivery address at checkout to see the cost.

Subtotal: $24.60
Product specifications
Category
Bearings
Product weight
35 g
Width
16 mm
Seal Type
Sealed 2 Sides
Outside Diameter (mm)
37
Dimensions (ID x OD x W)
30mm ID x 37mm OD x 16mm W
Bearing Type
Needle Roller Bearing
Bore (mm)
30

  • On time, every time

    Delivery across Australia, with tracking sent after dispatch. Ordering a large or heavy item? Ask our team to confirm freight costs and delivery arrangements before you buy.

    Delivery information

  • Secure payments

    Pay through our secure checkout with the card and express payment options available for your order. Review your items, delivery charges and total before confirming payment.

  • 100% happiness guarantee

    Need help after your purchase? Contact our Somerville team with your order number. We can help with product issues and explain your return options, including conditions and exclusions.

    Returns and support
Description  

IKO TLA3016UU Shell Type (Drawn Cup) Needle Roller Bearing – 30mm ID x 37mm OD x 16mm W

IKO TLA3016UU — shell type (drawn cup) needle roller bearing (30mm ID x 37mm OD x 16mm W). Built for compact gear trains, pivots and transmissions where a ball bearing will not fit. Stocked at Industrial Shed with trade pricing and fast Australia-wide dispatch.

► Key Features

  • Thin drawn-cup outer ring — presses straight into the housing with no shoulder or circlip needed
  • Open both ends
  • Runs directly on a hardened and ground shaft, or on a matching inner ring
  • Sealed both sides — keeps grease in and dirt out
  • Needle rollers give high radial load capacity in a very small cross-section

► Technical Specifications

  • Part Number: TLA3016UU
  • Bore (ID): 30mm
  • Outside Diameter (OD): 37mm
  • Width: 16mm
  • Type: Shell Type (Drawn Cup) Needle Roller Bearing
  • Brand: IKO

► Typical Applications

Transmissions, universal joints, swing arms, hydraulic motors, agricultural pivots and machine tools.

► Why Tradies Grab This

When there is no room for a ball bearing, a needle roller carries more load in a fraction of the section.

► Industrial Shed’s Trade Guarantee

  • We Stand By Our Gear: if it is not tough enough for the job, we will make it right.
  • Loyalty Matters: trade account pricing for repeat customers.
  • Real Support: talk to our crew — people who work on this gear, not a call centre.
  • Fast Dispatch: stocked lines out the door quickly.
Shipping  

Delivery options

We deliver across Australia. Freight costs depend on the item's size, weight and delivery address. Use the freight form above to request a price for this product.

Local delivery and collection

Local delivery is available on the Mornington Peninsula. You can also collect from Factory 1/30 Simcock Street, Somerville VIC 3912. Wait for your collection confirmation before coming in.

Tracking and delivery questions

Tracking details are sent after dispatch. For delivery timing, access requirements or help with a bulky item, call 03 5978 0078.

Read the shipping and delivery policy

Returns  

Start a return

Contact us with your order number and the reason for the return. We will confirm the next steps before you send anything back.

Change of mind

The returns policy allows 14 days from delivery for eligible unused items in their original condition and packaging. Special orders and custom products are excluded from change-of-mind returns. Other exclusions may apply.

Faulty or damaged items

Send photos and a description of the problem to supportHQ@industrialshed.net.au, or call 03 5978 0078.

Read the full returns and refund policy

You May Also Like

Example product title
$24.60
$24.60
Example product title
$24.60
$24.60
Example product title
$24.60
$24.60
Example product title
$24.60
$24.60
Example product title
$24.60
$24.60
Example product title
$24.60
$24.60
Example product title
$24.60
$24.60
Example product title
$24.60
$24.60
Example product title
$24.60
$24.60
Example product title
$24.60
$24.60