Alpha - Carbon Tap UNF Intermediate-1-1/2 x 12 | UNFCI1-12
- $248.12
- $248.12
- Unit price
- per
Vendor:
Alpha
SKU:
UNFCI1-12
The Alpha Carbon Tap UNF Intermediate-1-1/2 x 12 cuts " x null TPI UNF internal threads. It is a hardened carbon tap built for maintenance, repair and general workshop thread cutting by hand.
Read moreRead less
Alpha - Carbon Tap UNF Intermediate-1-1/2 x 12 | UNFCI1-12
The Alpha Carbon Tap UNF Intermediate-1-1/2 x 12 cuts " x null TPI UNF internal threads. It is a hardened carbon tap built for maintenance, repair and general workshop thread cutting by hand.
► Key Features
- Hardened carbon tool steel for general thread cutting and repair
- Cuts mild steel, aluminium, copper and brass
- Intermediate lead: approx. 4 thread lead – general purpose & through holes
► Technical Specifications
- Brand: Alpha
- Part No.: UNFCI1-12
- Tap Type: Intermediate (approx. 4 thread lead)
- Thread Form: UNF (Unified Fine)
- Thread Size: " x null TPI
- Threads per Inch: null
- Material: Carbon tool steel
- Drive: Square shank – suits standard tap wrenches
► Which Tap Do I Need?
- Taper – longest lead (about 9 threads). Starts straight and easy; use first, or alone for through holes.
- Intermediate – medium lead (about 4 threads). The all-rounder for through holes and general work.
- Bottoming – short lead (about 2 threads). Cuts full thread right to the bottom of blind holes; use after a taper or intermediate.
► Tapping Tips
- Drill the correct tapping size hole and deburr the entry.
- Fit the tap squarely in a tap wrench and start straight – check alignment in two directions.
- Use a cutting fluid suited to the material.
- Turn forward about one turn, then back off a quarter to half turn to break the chip.
- For blind holes, clear chips often and finish with a bottoming tap.
► Why Tradies Grab This
An affordable, sharp tap for repair and maintenance work, ready on the card when you need it.
► Industrial Shed’s Trade Guarantee – Shop with Confidence
- We Stand By Our Gear: Genuine Alpha tooling, sourced direct from Australian distributor Sheffield Group.
- Loyalty Matters: Trade account perks for repeat customers.
- Real Support, No Runaround: Backed by a crew who actually use the tools.
- Fast Delivery, Every Time: Get what you need without delays.
► Stock won’t last — get yours now at Industrial Shed!
- Brand: Alpha
- Part No.: UNFCI1-12
- Tap Type: Intermediate (approx. 4 thread lead)
- Product size
- 1-1/2"
- Product weight
- 0.03 kg
- Category
- Taps & Dies
Shipping calculated at checkout
Enter your delivery address at checkout to see the cost.
Product specifications
- Category
- Taps & Dies
- Product size
- 1-1/2"
- Product weight
- 0.03 kg
- Thread Type
- UNF
- Barcode
- 9342386049251
- Brand
- Alpha
- Part No.
- UNFCI1-12
- Tap Type
- Intermediate (approx. 4 thread lead)
- Thread Form
- UNF (Unified Fine)
- Thread Size
- " x null TPI
- Threads per Inch
- null
- Material
- Carbon tool steel
- Drive
- Square shank – suits standard tap wrenches
-
On time, every time
Delivery across Australia, with tracking sent after dispatch. Ordering a large or heavy item? Ask our team to confirm freight costs and delivery arrangements before you buy.
Delivery information -
Secure payments
Pay through our secure checkout with the card and express payment options available for your order. Review your items, delivery charges and total before confirming payment.
-
100% happiness guarantee
Need help after your purchase? Contact our Somerville team with your order number. We can help with product issues and explain your return options, including conditions and exclusions.
Returns and support
Alpha - Carbon Tap UNF Intermediate-1-1/2 x 12 | UNFCI1-12
The Alpha Carbon Tap UNF Intermediate-1-1/2 x 12 cuts " x null TPI UNF internal threads. It is a hardened carbon tap built for maintenance, repair and general workshop thread cutting by hand.
► Key Features
- Hardened carbon tool steel for general thread cutting and repair
- Cuts mild steel, aluminium, copper and brass
- Intermediate lead: approx. 4 thread lead – general purpose & through holes
► Technical Specifications
- Brand: Alpha
- Part No.: UNFCI1-12
- Tap Type: Intermediate (approx. 4 thread lead)
- Thread Form: UNF (Unified Fine)
- Thread Size: " x null TPI
- Threads per Inch: null
- Material: Carbon tool steel
- Drive: Square shank – suits standard tap wrenches
► Which Tap Do I Need?
- Taper – longest lead (about 9 threads). Starts straight and easy; use first, or alone for through holes.
- Intermediate – medium lead (about 4 threads). The all-rounder for through holes and general work.
- Bottoming – short lead (about 2 threads). Cuts full thread right to the bottom of blind holes; use after a taper or intermediate.
► Tapping Tips
- Drill the correct tapping size hole and deburr the entry.
- Fit the tap squarely in a tap wrench and start straight – check alignment in two directions.
- Use a cutting fluid suited to the material.
- Turn forward about one turn, then back off a quarter to half turn to break the chip.
- For blind holes, clear chips often and finish with a bottoming tap.
► Why Tradies Grab This
An affordable, sharp tap for repair and maintenance work, ready on the card when you need it.
► Industrial Shed’s Trade Guarantee – Shop with Confidence
- We Stand By Our Gear: Genuine Alpha tooling, sourced direct from Australian distributor Sheffield Group.
- Loyalty Matters: Trade account perks for repeat customers.
- Real Support, No Runaround: Backed by a crew who actually use the tools.
- Fast Delivery, Every Time: Get what you need without delays.
► Stock won’t last — get yours now at Industrial Shed!
Delivery options
We deliver across Australia. Freight costs depend on the item's size, weight and delivery address. Use the freight form above to request a price for this product.
Local delivery and collection
Local delivery is available on the Mornington Peninsula. You can also collect from Factory 1/30 Simcock Street, Somerville VIC 3912. Wait for your collection confirmation before coming in.
Tracking and delivery questions
Tracking details are sent after dispatch. For delivery timing, access requirements or help with a bulky item, call 03 5978 0078.
Start a return
Contact us with your order number and the reason for the return. We will confirm the next steps before you send anything back.
Change of mind
The returns policy allows 14 days from delivery for eligible unused items in their original condition and packaging. Special orders and custom products are excluded from change-of-mind returns. Other exclusions may apply.
Faulty or damaged items
Send photos and a description of the problem to supportHQ@industrialshed.net.au, or call 03 5978 0078.
You May Also Like
Example product title
- $248.12
- $248.12
- Unit price
- per
Example product title
- $248.12
- $248.12
- Unit price
- per
Example product title
- $248.12
- $248.12
- Unit price
- per
Example product title
- $248.12
- $248.12
- Unit price
- per
Example product title
- $248.12
- $248.12
- Unit price
- per
Example product title
- $248.12
- $248.12
- Unit price
- per
Example product title
- $248.12
- $248.12
- Unit price
- per
Example product title
- $248.12
- $248.12
- Unit price
- per
Example product title
- $248.12
- $248.12
- Unit price
- per
Example product title
- $248.12
- $248.12
- Unit price
- per
- Choosing a selection results in a full page refresh.