Alemlube - End Base Section | 3.DMx.C
- $70.40
$0.00- $70.40
- Unit price
- per
Vendor:
Alemlube
SKU:
3.DMX.C
The Alemlube 3.DMX.C DMX Final Base is the end section used to complete DMX progressive modular divider assemblies. It closes the divider base setup and is supplied as part of a modular lubrication system designed for accurate oil and grease distribution.
Read moreRead less
Alemlube DMX Final Base | 3.DMX.C
The Alemlube 3.DMX.C DMX Final Base is the end section used to complete DMX progressive modular divider assemblies. It closes the divider base setup and is supplied as part of a modular lubrication system designed for accurate oil and grease distribution.
Key Features
- Final base section for Alemlube DMX modular divider assemblies
- Used to complete progressive distributor base setups
- Supports high-pressure oil and grease lubrication systems
- Includes air purge functionality as part of the final base design
- Modular design allows easier servicing and system configuration
Technical Specifications
- Type: DMX Modular Divider Final Base
- Part No.: 3.DMX.C
- System: Alemlube DMX Progressive Modular Distributor
- Base Position: Final Base
- Working Pressure: Minimum 15 bar / Maximum 5,800psi (400 bar)
- Lubricants: Mineral oil minimum 15 cSt at working temperature; grease up to NLGI-2 maximum
- Working Temperature: -40°C to +120°C
- Inlet: 1/4" BSP
- Outlet: 1/8" BSP
- Number of Elements: 3 to 20
- Cycles: Maximum 500
- Gasket: Viton 90sh O-ring
- Material: Steel, Zn-Ni plated free of Cr-V, or SS316L
- Protective Coating: Zinc-Nickel, 800 hour salt spray tested
- Marking: ATEX II GD - CE
- Supplied With: Screw
- Air Purge: 2 valves included in the final base
- Base Tightening Torque: 8 Nm
- Brand: Alemlube
Why Tradies Buy This
This final base is required to properly complete a DMX divider assembly. It’s built for technicians who need a correct-fit replacement or finishing section for high-pressure automatic lubrication systems.
Why Choose Alemlube at Industrial Shed
- Correct End Section: Completes DMX modular divider assemblies
- High-Pressure Rated: Designed for demanding oil and grease systems
- Service-Friendly: Supports modular maintenance and replacement
- Industrial Shed Support: Trade-focused supply for specialist lubrication parts
► Stock won’t last — get yours now at Industrial Shed!
- Product weight
- 1000 g
- Material
- Steel
- Category
- Metering Valves
Shipping calculated at checkout
Enter your delivery address at checkout to see the cost.
Product specifications
- Category
- Metering Valves
- Material
- Steel
- Product weight
- 1000 g
- Length
- 50 mm
- Width
- 120 mm
- Height
- 100 mm
-
On time, every time
Delivery across Australia, with tracking sent after dispatch. Ordering a large or heavy item? Ask our team to confirm freight costs and delivery arrangements before you buy.
Delivery information -
Secure payments
Pay through our secure checkout with the card and express payment options available for your order. Review your items, delivery charges and total before confirming payment.
-
100% happiness guarantee
Need help after your purchase? Contact our Somerville team with your order number. We can help with product issues and explain your return options, including conditions and exclusions.
Returns and support
Alemlube DMX Final Base | 3.DMX.C
The Alemlube 3.DMX.C DMX Final Base is the end section used to complete DMX progressive modular divider assemblies. It closes the divider base setup and is supplied as part of a modular lubrication system designed for accurate oil and grease distribution.
Key Features
- Final base section for Alemlube DMX modular divider assemblies
- Used to complete progressive distributor base setups
- Supports high-pressure oil and grease lubrication systems
- Includes air purge functionality as part of the final base design
- Modular design allows easier servicing and system configuration
Technical Specifications
- Type: DMX Modular Divider Final Base
- Part No.: 3.DMX.C
- System: Alemlube DMX Progressive Modular Distributor
- Base Position: Final Base
- Working Pressure: Minimum 15 bar / Maximum 5,800psi (400 bar)
- Lubricants: Mineral oil minimum 15 cSt at working temperature; grease up to NLGI-2 maximum
- Working Temperature: -40°C to +120°C
- Inlet: 1/4" BSP
- Outlet: 1/8" BSP
- Number of Elements: 3 to 20
- Cycles: Maximum 500
- Gasket: Viton 90sh O-ring
- Material: Steel, Zn-Ni plated free of Cr-V, or SS316L
- Protective Coating: Zinc-Nickel, 800 hour salt spray tested
- Marking: ATEX II GD - CE
- Supplied With: Screw
- Air Purge: 2 valves included in the final base
- Base Tightening Torque: 8 Nm
- Brand: Alemlube
Why Tradies Buy This
This final base is required to properly complete a DMX divider assembly. It’s built for technicians who need a correct-fit replacement or finishing section for high-pressure automatic lubrication systems.
Why Choose Alemlube at Industrial Shed
- Correct End Section: Completes DMX modular divider assemblies
- High-Pressure Rated: Designed for demanding oil and grease systems
- Service-Friendly: Supports modular maintenance and replacement
- Industrial Shed Support: Trade-focused supply for specialist lubrication parts
► Stock won’t last — get yours now at Industrial Shed!
Delivery options
We deliver across Australia. Freight costs depend on the item's size, weight and delivery address. Use the freight form above to request a price for this product.
Local delivery and collection
Local delivery is available on the Mornington Peninsula. You can also collect from Factory 1/30 Simcock Street, Somerville VIC 3912. Wait for your collection confirmation before coming in.
Tracking and delivery questions
Tracking details are sent after dispatch. For delivery timing, access requirements or help with a bulky item, call 03 5978 0078.
Start a return
Contact us with your order number and the reason for the return. We will confirm the next steps before you send anything back.
Change of mind
The returns policy allows 14 days from delivery for eligible unused items in their original condition and packaging. Special orders and custom products are excluded from change-of-mind returns. Other exclusions may apply.
Faulty or damaged items
Send photos and a description of the problem to supportHQ@industrialshed.net.au, or call 03 5978 0078.
You May Also Like
Example product title
- $70.40
$0.00- $70.40
- Unit price
- per
Example product title
- $70.40
$0.00- $70.40
- Unit price
- per
Example product title
- $70.40
$0.00- $70.40
- Unit price
- per
Example product title
- $70.40
$0.00- $70.40
- Unit price
- per
Example product title
- $70.40
$0.00- $70.40
- Unit price
- per
Example product title
- $70.40
$0.00- $70.40
- Unit price
- per
Example product title
- $70.40
$0.00- $70.40
- Unit price
- per
Example product title
- $70.40
$0.00- $70.40
- Unit price
- per
Example product title
- $70.40
$0.00- $70.40
- Unit price
- per
Example product title
- $70.40
$0.00- $70.40
- Unit price
- per
- Choosing a selection results in a full page refresh.