► Union | Buffing Wheels

Control the Cut & Finish Metal Surfaces Properly on Site Buffing wheels don’t get much attention until something goes wrong. The finish looks patchy. Heat marks show up. Surface comes out uneven even though the compound is right. That’s almost always the wheel. Union buffing wheels are built for trades...

Control the Cut & Finish Metal Surfaces Properly on Site

Buffing wheels don’t get much attention until something goes wrong.

The finish looks patchy. Heat marks show up. Surface comes out uneven even though the compound is right. That’s almost always the wheel.

Union buffing wheels are built for trades that already know polishing isn’t just about making metal shine. It’s about control. Pressure, contact area, heat, all of it comes through the wheel before it ever touches the surface.

You’ll see them used everywhere from fabrication benches to maintenance work on worn components. Some jobs are about restoring a surface. Others are about finishing it clean enough so coatings actually hold.

Most setups run through a sequence. Material gets prepped using Metal Cutting & Grinding Tools, then refined using Grinders & Sanders fitted with Polishing & Buffing Accessories. Around that, you’ll usually find Workbenches, Drill Accessories, Grinding & Cut-Off Wheels & Welding Equipment feeding into the same workflow.

Get the wheel right & everything after it gets easier.

What’s in This Collection:

► Sisal Buffing Wheels
‣ Hard-cut wheels for stripping back scale, marks & rough surfaces

► Spiral Sewn Wheels
‣ Balanced structure for mid-stage cutting & refinement

► Loose Leaf Buffing Wheels
‣ Soft contact for final finishing without marking the surface

► Airway Buffing Wheels
‣ Keeps airflow moving to reduce heat build-up under load

► Tapered Buffing Wheels
‣ Reaches into edges, corners & awkward profiles

► 150mm & 200mm Workshop Wheels
‣ Standard sizing for bench polishing setups

► Angle Grinder Buffing Wheels
‣ Smaller format wheels for mobile site work

Most trades end up running more than one wheel type. Trying to push one wheel through every stage usually slows things down or leaves marks that need fixing later.

Trade Applications for Union Buffing Wheels

► Fabrication shops
 ‣ Clean up weld areas before coating or final install

► Maintenance work
 ‣ Bring worn surfaces back without replacing parts

► Automotive finishing
 ‣ Restore metal panels, brackets & components

► Production environments
 ‣ Keep surface finish consistent across batches

► Stainless steel work
 ‣ Maintain clean finishes where contamination matters

► Aluminium polishing
 ‣ Smooth out surfaces without tearing softer materials

Consistency matters more than speed here. A clean finish saves more time than rushing it.

Sidebar
Filter
  • 10
  • 15
  • 20
  • 25
  • 30
  • 50
  • Featured
  • Most relevant
  • Best selling
  • Alphabetically, A-Z
  • Alphabetically, Z-A
  • Price, low to high
  • Price, high to low
  • Date, old to new
  • Date, new to old
Sort

Sort by:

  • Featured
  • Most relevant
  • Best selling
  • Alphabetically, A-Z
  • Alphabetically, Z-A
  • Price, low to high
  • Price, high to low
  • Date, old to new
  • Date, new to old
  • Union Quick Change Holder R Type Flexible Rubber 75mm Dia M14 x 2 - Carded
    Union - Buffing Wheel Stitched Rag 150 2S - Inner Carton (6) | PBWR-65-6
    Union Buffing Wheel Stitched Rag 150 2S – Inner Carton (6) | PBWR-65-6 The Union Stitched Rag Buffing Wheel is designed for aggressive polishing and surface preparation. With a 150mm diameter and double stitch (2S) construction, it provides firm, consistent polishing performance for demanding...
    $167.69
    $0.00
    $167.69
  • Union Buffing Wheel Stitched Rag 150 2S
    Union - Buffing Wheel Stitched Rag 150 2S | PBWR-65
    Union Buffing Wheel Stitched Rag 150 2S | PBWR-65 The Union Stitched Rag Buffing Wheel is built for more aggressive polishing and surface preparation tasks. With a 150mm diameter and double stitch (2S) construction, it delivers firmer polishing action—ideal for heavier cutting and surface...
    $23.35
    $0.00
    $23.35
  • Union Quick Change Holder R Type Flexible Rubber 75mm Dia M14 x 2 - Carded
    Union - Buffing Wheel Stitched Rag 150 1S - Inner Carton (6) | PBWR-60-6
    Union Buffing Wheel Stitched Rag 150 1S – Inner Carton (6) | PBWR-60-6 The Union Stitched Rag Buffing Wheel is designed for general-purpose polishing, blending, and finishing across a range of metal surfaces. With a 150mm diameter and single stitch (1S) construction, it provides...
    $89.96
    $0.00
    $89.96
  • Union Buffing Wheel Stitched Rag 150 1S
    Union - Buffing Wheel Stitched Rag 150 1S | PBWR-60
    Union Buffing Wheel Stitched Rag 150 1S | PBWR-60 The Union Stitched Rag Buffing Wheel is designed for general-purpose polishing and finishing. With a 150mm diameter and single stitch (1S) construction, it provides flexible polishing performance for smooth, consistent results. ► Key Features Single...
    $12.54
    $0.00
    $12.54
  • Union Buffing Wheel Calico 200 x 100 Fold
    Union - Buffing Wheel Calico 200 x 100 Fold | PBWC-85
    Union Buffing Wheel Calico 200 x 100 Fold | PBWC-85 The Union Calico Buffing Wheel is designed for high-quality finishing and polishing across larger surfaces. With a 200mm diameter and 100-fold construction, it provides enhanced softness and coverage for refined results. ► Key Features...
    $40.01
    $0.00
    $40.01
  • Union Buffing Wheel Calico 200 x 50 Fold
    Union - Buffing Wheel Calico 200 x 50 Fold | PBWC-80
    Union Buffing Wheel Calico 200 x 50 Fold | PBWC-80 The Union Calico Buffing Wheel is designed for fine polishing across larger surface areas. With a 200mm diameter and 50-fold construction, it delivers smooth, consistent finishing performance. ► Key Features Calico construction for smooth...
    $33.35
    $0.00
    $33.35
  • Union Buffing Wheel Calico 150 x 100 Fold
    Union - Buffing Wheel Calico 150 x 100 Fold | PBWC-65
    Union Buffing Wheel Calico 150 x 100 Fold | PBWC-65 The Union Calico Buffing Wheel is designed for fine polishing and high-quality surface finishing. With a 150mm diameter and 100-fold construction, it provides a fuller, softer polishing action for refined results. ► Key Features...
    $25.02
    $0.00
    $25.02
  • Union Buffing Wheel Calico150 x 50 Fold
    Union - Buffing Wheel Calico150 x 50 Fold | PBWC-60
    Union Buffing Wheel Calico 150 x 50 Fold | PBWC-60 The Union Calico Buffing Wheel is designed for fine polishing and finishing applications. With a 150mm diameter and 50-fold construction, it delivers soft, consistent polishing action—ideal for achieving high-quality surface finishes. ► Key Features...
    $20.03
    $0.00
    $20.03

Built for Work That Gets Looked At Twice

Some work gets installed & forgotten. Finishing work doesn’t.

Across fabrication, construction & industrial maintenance, surface finish is one of the last things checked before sign-off. If it’s off, it gets picked up straight away.

Australian conditions don’t make it easier. Heat, dust & handling all affect surface condition before polishing even starts.

Industrial Shed supplies union buffing wheels used across workshops & job sites where that finish actually matters. When you run out mid-job, Same day dispatch keeps things moving. Support through Trade exclusives helps crews stay consistent across repeat work.

Supporting gear like Angle Grinders, Polishing & Buffing Accessories & Workbenches keeps the whole process controlled from start to finish.

► Wheels matched to real polishing stages, not generic use
► Consistent performance across steel, stainless & aluminium
► Reliable supply for repeat jobs & workshop use
► Fast delivery across Australia when timing matters

Finish It Right Without Going Back Over It

If the wheel isn’t right, you’ll feel it straight away.
If the finish isn’t clean, you’ll be doing it twice.

That’s where time disappears.

Set the process up properly, match the wheel to the stage & keep the job moving forward instead of fixing it.

Frequently Asked Questions

Start with a sisal or firm stitched wheel to remove marks, then step down to softer wheels for finishing.

Wrong wheel for the stage or too much pressure. Hard wheels leave marks during finishing.

Yes, but only wheels designed for grinder speeds & mounting should be used.

Loose leaf or soft cotton wheels reduce drag & prevent surface damage.

They cover more surface faster, but smaller wheels give better control in tight areas.

Use airway wheels, reduce pressure & avoid holding in one spot too long.

Brands

Union

Union