Specialist Automotive Equipment for Professional Workshops

Looking for Sykes-Pickavant tools in Australia? Industrial Shed brings together specialist automotive repair equipment for mechanics, diesel technicians, fleet workshops & industrial maintenance teams. From seized bearings to engine timing repairs, the right equipment helps turn difficult workshop tasks into controlled, repeatable procedures.

Start with Sykes-Pickavant Extractors & Pullers for bearing, gear & component removal or explore Sykes-Pickavant Engine Tools for dedicated engine servicing applications.

Sykes-Pickavant is an established specialist tool brand with a broad automotive service range covering mechanical extraction, engine maintenance, braking, diagnostics, workshop equipment & more.

At Industrial Shed, we've organised the brand into 17 specialist collections so you can find the right tool family without searching through unrelated equipment.

Explore All 17 Sykes-Pickavant Tool Collections

Choose the repair task below to reach the relevant specialist range.

Removal, Extraction & Thread Repairs

► Extractors & Pullers – Bearing removal, mechanical pullers, internal extractors & specialist extraction kits.
► Hydraulic Tools – Hydraulic force equipment for suitable workshop removal & installation procedures.
► Stud & Nut Tools – Equipment for seized studs, damaged fasteners & specialist removal tasks.
► Thread Repair – Thread restoration & repair equipment for compatible components.

Engine, Timing & Drivetrain

► Engine Tools – Specialist engine servicing equipment, including tools for selected engine testing & mechanical procedures.
► Timing Tools – Engine-specific camshaft, crankshaft & valve timing fixtures.
► Clutch Tools – Equipment for compatible clutch & drivetrain servicing.
► Drive Belt Tools – Tools for accessing & servicing suitable auxiliary belt systems.
► Fuel System Tools – Equipment for selected fuel-system servicing & diagnostic operations.

Braking, Cooling & Electrical Diagnosis

► Brake Tools – Brake bleeding, caliper servicing & fluid-testing equipment.
► Cooling System Tools – Cooling-system pressure testers & compatible temperature-measuring accessories.
► Diagnostics – Specialist diagnostic service tools, including equipment for oxygen sensor access.
► Ignition Tools – Ignition-system service information & enquiries for application-specific tools.
► Electrical Tools – Tools associated with automotive electrical testing & servicing.

Everyday Workshop Support

► Hand Tools – Specialist hand-operated tools for mechanical workshop tasks.
► General Workshop Tools – Equipment for broader repair-bay & workshop applications.
► Measuring & Alignment – Measurement, alignment & precision-checking applications.

Shopping tip: Some specialist categories may have no current product listings. If you already know the Sykes-Pickavant part number, use it when enquiring about the required equipment.

Featured Sykes-Pickavant Tools Worth Exploring

Different repairs demand different equipment. These examples show how Sykes-Pickavant's range addresses particular workshop problems.

Dowel Pin Puller Master Set – 680006

Removing a stubborn dowel pin without damaging the surrounding assembly requires a suitable gripping & extraction method.

The Sykes-Pickavant 680006 Dowel Pin Puller Master Set is listed for dowel pin removal in automotive, engineering & industrial workshop applications.

Consider it when: the repair involves compatible dowel pins that cannot be removed safely using ordinary gripping tools.

1500 Series Thin Jaw Puller Kit – 193103

Restricted access can make an otherwise straightforward bearing or pulley removal surprisingly difficult.

The Sykes-Pickavant 193103 Thin Jaw Puller Kit is designed for extraction work where conventional puller jaws may be too thick to reach the component.

Consider it when: there is limited clearance behind the part being removed.

Split Collet Internal Extractor – 095816

A bearing seated inside a blind housing presents a different problem from a component that can be gripped externally.

The Sykes-Pickavant 095816 Split Collet Internal Extractor is listed with a 38–50 mm internal extraction range.

Consider it when: the bearing or component dimensions fall within the specified range & the removal method requires an internal expanding grip.

Mercedes-Benz 2.0 CDI Engine Timing Kit – 077600

A timing repair requires the correct engine-specific locating fixtures, not a general-purpose substitute.

The Sykes-Pickavant 077600 Mercedes 2.0 CDI Engine Timing Kit is intended for compatible Mercedes-Benz diesel engine timing operations.

Consider it when: the engine code & repair procedure match the kit's stated applications.

These are examples of listed products rather than a ranking of popularity. Review each product page for current purchasing information & compatibility.

Which Sykes-Pickavant Tool Family Fits Your Job?

A workshop buying several specialist tools should begin with its actual vehicle mix & common repair operations.

That approach helps avoid collecting expensive equipment that doesn't suit the work coming through the door.

Why Sykes-Pickavant Has a Place in Specialist Workshops?

Some repairs are limited by access. Others depend on controlled force, accurate positioning or the ability to test a system without dismantling it unnecessarily.

Sykes-Pickavant's range addresses these different requirements through dedicated tool families.

Controlled Component Removal

A thin-jaw puller, internal extractor & heavy-duty hydraulic system may all remove fitted components, but their methods are different.

The choice depends on where force can safely be applied, how the component is supported & the space available around it.

Engine-Specific Servicing

Modern engines often require specialised timing fixtures, compression-testing adaptors or other application-specific equipment.

A suitable tool helps the technician carry out the prescribed procedure. It doesn't replace the service information or final verification checks.

More Focused Diagnostic Work

Brake-fluid testing, cooling-system pressure checks & mechanical access to sensors involve distinct diagnostic tasks.

Using the correct equipment can help narrow the investigation before components are replaced.

Equipment for Demanding Repairs

Commercial vehicles, agricultural machinery & industrial assemblies can present substantial mechanical loads.

Capacity, connection design & safe operating procedures become particularly important when choosing equipment for these applications.

How to Select the Correct Sykes-Pickavant Tool?

Match the Part Number to the Repair

A vehicle make or engine capacity is rarely enough to confirm compatibility.

For timing tools, identify the engine code. For extractors, establish the component dimensions. For pressure testers, confirm the connection & specified test pressure.

Look at the Complete Setup

Will the job require an adaptor, reaction fixture, separate hydraulic component or additional torque equipment?

A kit may cover several applications without containing everything required for every repair.

Check the Limits

A puller's nominal capacity, an extractor's working range & a pressure tester's permitted operating conditions all affect suitability.

Never substitute a tool simply because its dimensions appear close enough.

Consider Storage & Future Use

Specialist kits are most useful when their components remain complete.

Workshops sharing equipment between technicians benefit from clearly identified storage, application records & routine inspection.

For related equipment, browse  Shop Presses & Vices or  Testing & Measurement Tools.

Building a Practical Sykes-Pickavant Workshop Range

An independent automotive repairer may begin with pullers, brake service tools & a small number of engine-specific kits.

A diesel specialist might prioritise heavy vehicle extraction equipment, compression testing & cooling-system diagnostics.

Fleet maintenance operations often have a third requirement: consistency. If several technicians service the same vehicles, matching tool part numbers to fleet applications can reduce uncertainty when equipment is shared.

Whatever the workshop's size, organise specialist tools by their intended task. Suitable  Tool Storage helps keep accessories together, while  Workshop Equipment provides related repair-bay options.

For a look at everyday mechanical repair work, read A Day With An Automotive Mechanic Peninsula.