► Rennsteig | Chisel

Heavy-Strike Cutting & Shaping Chisels Built for Precision Steelwork Across Australian Workshops Clean cutting fails fast when a chisel mushrooms, glances off the surface or loses its edge under repeated blows. This Rennsteig chisel range gives tech hardened, precision-ground cutting edges that maintain their bite across steel, alloy, pins, brackets,...

Heavy-Strike Cutting & Shaping Chisels Built for Precision Steelwork Across Australian Workshops

Clean cutting fails fast when a chisel mushrooms, glances off the surface or loses its edge under repeated blows. This Rennsteig chisel range gives tech hardened, precision-ground cutting edges that maintain their bite across steel, alloy, pins, brackets, sheet metal & structural components—ideal for fabrication, mechanical teardown, metal shaping & workshop demolition work. Trades across Somerville, the Mornington Peninsula, Frankston, Cranbourne & Melbourne’s southeast trust Industrial Shed because Australian workshop conditions demand chisels that hold edge strength against heat, vibration, impact cycles & nonstop fabrication tasks. Crews separating seized brackets often pair this range with Pliers Sets to stabilize components before striking. When techs open housings or machinery guards, they combine these chisels with Screwdrivers for quick removal. For tight metal pockets or low-light areas, teams rely on Inspection Mirrors & Lighting to confirm tool alignment before loading the hammer.

Older plant equipment, rust-bound assemblies & thick paint layers often hide seams or cut lines that require precise chisel work. VIC fabrication shops keep this Rennsteig range beside Machine Screws when reseating bracket plates after metal removal. When confirming alignment or edge geometry after chiselling, trades use Combination Squares to verify clean straightness. Busy fabrication, mechanical repair & metal-teardown days also tie these chisels to Specialty Fasteners, especially when opening access to mounting points or removing fatigued hardware.

What’s in This Collection:

► Rennsteig Cold Chisels
‣ Hardened cutting edges for clean shearing on steel plates, bolts & heavy metal.

► Rennsteig Flat Chisels
‣ Broad-edge profiles for shaping, wedge cuts & material removal.

► Rennsteig Cape Chisels
‣ Narrow cutting tips for grooves, channels & precise metal separation.

► Rennsteig Chisel Sets
‣ Complete workshop-ready sets built for fabrication, automotive & teardown work.

 

Sidebar
Filter
  • 10
  • 15
  • 20
  • 25
  • 30
  • 50
  • Featured
  • Most relevant
  • Best selling
  • Alphabetically, A-Z
  • Alphabetically, Z-A
  • Price, low to high
  • Price, high to low
  • Date, old to new
  • Date, new to old
Sort

Sort by:

  • Featured
  • Most relevant
  • Best selling
  • Alphabetically, A-Z
  • Alphabetically, Z-A
  • Price, low to high
  • Price, high to low
  • Date, old to new
  • Date, new to old
  • Rennsteig - 250mm Cold Chisel with Handguard | 311250H
    Rennsteig - 250mm Cold Chisel with Handguard | 311250H
    Rennsteig - 250mm Cold Chisel with Handguard | 311250H 250mm Cold Chisel with Handguard is a Rennsteig tool in the cold chisels range suited to trade, maintenance & workshop applications Flat cold chisel with handguard 25 x 250 mm, polished Predominantly used in metalworking...
    $44.91
    $47.95
    $44.91
  • Rennsteig - 350mm Cold Chisel with Handguard | 311350H
    Rennsteig - 350mm Cold Chisel with Handguard | 311350H
    Rennsteig - 350mm Cold Chisel with Handguard | 311350H 350mm Cold Chisel with Handguard is a Rennsteig tool in the cold chisels range suited to trade, maintenance & workshop applications This SKU 311350H keeps the strongest currently available Rennsteig data separated into structured fields...
    $57.07
    $59.95
    $57.07
  • Rennsteig - 300mm Cold Chisel with Handguard | 311300H
    Rennsteig - 300mm Cold Chisel with Handguard | 311300H
    Rennsteig - 300mm Cold Chisel with Handguard | 311300H 300mm Cold Chisel with Handguard is a Rennsteig tool in the cold chisels range suited to trade, maintenance & workshop applications This SKU 311300H keeps the strongest currently available Rennsteig data separated into structured fields...
    $50.98
    $53.95
    $50.98
  • Rennsteig - Flat Cold Chisel 500 x 30mm | 310500
    Rennsteig - 500 x 30mm Flat Cold Chisel | 310500
    Rennsteig - 500 x 30mm Flat Cold Chisel | 310500 500 x 30mm Flat Cold Chisel is a Rennsteig tool in the cold chisels range suited to trade, maintenance & workshop applications Flat cold chisel 30 x 500 mm, polished Predominantly used in metalworking...
    $51.95
    $54.95
    $51.95
  • Rennsteig - 400 x 27mm Flat Cold Chisel | 310400R
    Rennsteig - 400 x 27mm Flat Cold Chisel | 310400R
    Rennsteig - 400 x 27mm Flat Cold Chisel | 310400R 400 x 27mm Flat Cold Chisel is a Rennsteig tool in the cold chisels range suited to trade, maintenance & workshop applications Flat cold chisel 27 x 400 mm, polished Predominantly used in metalworking...
    $43.49
    $45.95
    $43.49
  • Rennsteig - Flat Cold Chisel | 310300R
    Rennsteig - Flat Cold Chisel | 310300R
    Rennsteig - Flat Cold Chisel | 310300R Flat Cold Chisel is a Rennsteig tool in the cold chisels range suited to trade, maintenance & workshop applications This SKU 310300R keeps the strongest currently available Rennsteig data separated into structured fields for faster trade-side comparison...
    $41.19
    $43.95
    $41.19
  • Rennsteig - Flat Cold Chisel 350mm | 310350R
    Rennsteig - 350mm Flat Cold Chisel | 310350R
    Rennsteig - 350mm Flat Cold Chisel | 310350R 350mm Flat Cold Chisel is a Rennsteig tool in the cold chisels range suited to trade, maintenance & workshop applications This SKU 310350R keeps the strongest currently available Rennsteig data separated into structured fields for faster...
    $42.23
    $44.95
    $42.23
  • Rennsteig - Flat Cold Chisel | 310250
    Rennsteig - Flat Cold Chisel | 310250
    Rennsteig - Flat Cold Chisel | 310250 Flat Cold Chisel is a Rennsteig tool in the cold chisels range suited to trade, maintenance & workshop applications Flat cold chisel 25 x 250 mm, polished Predominantly used in metalworking ► Key Features Rennsteig Flat Cold...
    $27.88
    $34.95
    $27.88
  • Rennsteig - Flat Cold Chisel | 310200
    Rennsteig - Flat Cold Chisel | 310200
    Rennsteig - Flat Cold Chisel | 310200 Flat Cold Chisel is a Rennsteig tool in the cold chisels range suited to trade, maintenance & workshop applications Flat cold chisel 24 x 200 mm, polished Predominantly used in metalworking ► Key Features Rennsteig Flat Cold...
    $27.47
    $28.95
    $27.47
  • Rennsteig - Flat Cold Chisel 175 x 21mm | 310175C
    Rennsteig - 175 x 21mm Flat Cold Chisel | 310175C
    Rennsteig - 175 x 21mm Flat Cold Chisel | 310175C 175 x 21mm Flat Cold Chisel is a Rennsteig tool in the cold chisels range suited to trade, maintenance & workshop applications Flat cold chisel 21 x 175 mm, polished Predominantly used in metalworking...
    $27.29
    $28.95
    $27.29
  • Rennsteig - Flat Cold Chisel | 310175
    Rennsteig - Flat Cold Chisel | 310175
    Rennsteig - Flat Cold Chisel | 310175 Flat Cold Chisel is a Rennsteig tool in the cold chisels range suited to trade, maintenance & workshop applications Flat cold chisel 21 x 175 mm, polished Predominantly used in metalworking ► Key Features Rennsteig Flat Cold...
    $25.26
    $26.95
    $25.26
  • Rennsteig - Flat Cold Chisel | 310150
    Rennsteig - Flat Cold Chisel | 310150
    Rennsteig - Flat Cold Chisel | 310150 Flat Cold Chisel is a Rennsteig tool in the cold chisels range suited to trade, maintenance & workshop applications Flat cold chisel 18 x 150 mm, polished Predominantly used in metalworking ► Key Features Rennsteig Flat Cold...
    $20.25
    $21.95
    $20.25
  • Rennsteig - 125 x 18mm Flat Cold Chisel | 310125C
    Rennsteig - 125 x 18mm Flat Cold Chisel | 310125C
    Rennsteig - 125 x 18mm Flat Cold Chisel | 310125C 125 x 18mm Flat Cold Chisel is a Rennsteig tool in the cold chisels range suited to trade, maintenance & workshop applications Flat cold chisel 18 x 125 mm, polished Predominantly used in metalworking...
    $20.67
    $21.95
    $20.67
  • Rennsteig - Flat Cold Chisel 125mm | 310125
    Rennsteig - 125mm Flat Cold Chisel | 310125
    Rennsteig - 125mm Flat Cold Chisel | 310125 125mm Flat Cold Chisel is a Rennsteig tool in the cold chisels range suited to trade, maintenance & workshop applications Flat cold chisel 18 x 125 mm, polished Predominantly used in metalworking ► Key Features Rennsteig...
    $18.72
    $19.95
    $18.72
  • Rennsteig - 100 x 15mm Flat Cold Chisel | 310100C
    Rennsteig - 100 x 15mm Flat Cold Chisel | 310100C
    Rennsteig - 100 x 15mm Flat Cold Chisel | 310100C 100 x 15mm Flat Cold Chisel is a Rennsteig tool in the cold chisels range suited to trade, maintenance & workshop applications Flat cold chisel 15 x 100 mm, polished Predominantly used in metalworking...
    $19.12
    $20.95
    $19.12
  • Rennsteig - Flat Cold Chisel 100mm | 310100
    Rennsteig - 100mm Flat Cold Chisel | 310100
    Rennsteig - 100mm Flat Cold Chisel | 310100 100mm Flat Cold Chisel is a Rennsteig tool in the cold chisels range suited to trade, maintenance & workshop applications Flat cold chisel 15 x 100 mm, polished Predominantly used in metalworking ► Key Features Rennsteig...
    $17.49
    $18.95
    $17.49
  • Rennsteig - Box Chisel 300mm | 279300
    Rennsteig - 300mm Box Chisel | 279300
    Rennsteig - 300mm Box Chisel | 279300 Box Chisel 300mm is a Rennsteig tool in the chisels range suited to trade, maintenance & workshop applications For opening uncut maxi-buffer tubes Made from special tool steel, forged ► Key Features Rennsteig Box Chisel 300mm suits...
    $37.54
    $39.95
    $37.54
  • Rennsteig - SDS Plus Chisel Set Short 3pc | 21200096
    Rennsteig - SDS Plus Chisel Set Short 3pc | 21200096
    Rennsteig - SDS Plus Chisel Set Short 3pc | 21200096 SDS Plus Chisel Set Short 3pc is a Rennsteig tool in the chisels range suited to trade, maintenance & workshop applications PCS chisel set for electric hammers SDS plus (3-piece) SDS plus chisel set...
    $85.58
    $89.95
    $85.58
  • Rennsteig - 600 x 30mm Flat Cold Chisel | 310600
    Rennsteig - 600 x 30mm Flat Cold Chisel | 310600
    Rennsteig - 600 x 30mm Flat Cold Chisel | 310600 600 x 30mm Flat Cold Chisel is a Rennsteig tool in the cold chisels range suited to trade, maintenance & workshop applications Flat cold chisel 30 x 600 mm, powder-coated Predominantly used in metalworking...
    $65.59
    $68.95
    $65.59
  • Rennsteig - 500 x 30mm Flat Cold Chisel | 310500C
    Rennsteig - 500 x 30mm Flat Cold Chisel | 310500C
    Rennsteig - 500 x 30mm Flat Cold Chisel | 310500C 500 x 30mm Flat Cold Chisel is a Rennsteig tool in the cold chisels range suited to trade, maintenance & workshop applications Flat cold chisel 30 x 500 mm, polished Predominantly used in metalworking...
    $54.62
    $57.95
    $54.62

Controlled Cutting Power That Keeps VIC Fabrication & Mechanical Work Moving

Strong chisel accuracy shapes how fast teardown, shaping & material removal progress. Across Melbourne’s southeast, workshops position this Rennsteig chisel range near Tool Storage so the right cutting profile stays ready for high-impact tasks.

Older machinery & vehicle components often carry scale, rust or paint that obstructs the cutting line. Peninsula crews prepare surfaces with Polishers & Buffers to expose clean metal before striking. Once aligned, Rennsteig chisels deliver straight, predictable cuts that reduce re-striking & prevent tool drift.

Modern fabrication, automotive teardown & industrial servicing frequently demand chisel access around tight frames, channels, gussets & brackets. Slim Rennsteig bodies slide into these confined structural pockets so techs can open seams or shear hardware without major component removal. High-demand VIC repair bays rely on a Tool Maintenance Kit to clean chisel edges, protect cutting faces & maintain consistent strike accuracy across long shifts.

Industrial Shed supports metalworkers, mechanics, engineers & fabrication crews with Same day dispatch from Somerville so chisels arrive fast when heavy teardown jobs stack up. Multi-bay sites also depend on Trade support Solutions for chisel-set planning plus Return & Refunds for smooth upgrades as tool wear increases.

► Hardened cutting edges for clean metal shearing & shaping
► High-impact durability for Australian fabrication & mechanical tasks
► Slim bodies for tight-access metalwork
► Fast nationwide dispatch for urgent teardown & steelwork jobs

Searching for chisels that strike clean, cut true & hold their edge under heavy workloads? Connect with the Industrial Shed crew in Somerville. We supply tough Rennsteig chisels, proven metalworking support & fast dispatch across Australia.

Frequently Asked Questions

Yes. They’re hardened to resist tip rolling, mushrooming & edge fatigue.

They are. Their ground edges deliver controlled penetration on stubborn metal.

Yes. Cape & flat profiles provide precise shaping across steel & alloy.

Brands

Rennsteig

Rennsteig