► ICCONS® | Collated Ballistic Drive Pins

Reliable Penetration for Hard Concrete & Steel Fixing into hard concrete or steel where the pin needs to penetrate a demanding base material reliably? ICCONS® | Collated Ballistic Drive Pins use a purpose-designed ballistic point with a strengthened shank to support direct fastening into compatible hard concrete, concrete & steel...

Reliable Penetration for Hard Concrete & Steel

Fixing into hard concrete or steel where the pin needs to penetrate a demanding base material reliably? ICCONS® | Collated Ballistic Drive Pins use a purpose-designed ballistic point with a strengthened shank to support direct fastening into compatible hard concrete, concrete & steel applications.

Collation makes these pins particularly practical where fixing points repeat across framing, fit-out & construction work. Compatible ICCONS® gas-tool ballistic pins are supplied in 10-pin strips, allowing the fastening tool to advance through multiple fixings while keeping the correct consumables together.

For closely related fastening options, explore Specialty Fasteners & Fixings, Screws & Anchors & Power Tools.

What Are ICCONS® Collated Ballistic Drive Pins?

Collated ballistic drive pins are direct-fastening consumables designed for applications where harder base materials place greater demands on pin penetration. ICCONS® ballistic-point geometry is designed to generate greater penetrating power, while the strengthened shank helps reduce the possibility of pin collapse during suitable installation.

Depending on the specific pin family & compatible tool, ICCONS® ballistic-point pins are used across:

► Hard concrete
► Concrete
► Steel
► Bottom-plate fixing
► Timber framing applications
► Commercial fit-outs
► Repetitive direct fastening
► Compatible gas-powered fastening systems

The collated format also changes how the installer works. Rather than handling individual pins at every fixing position, compatible ballistic pins are grouped in strips for progressive feeding through the fastening tool.

ICCONS® offers ballistic-point consumables across different tool platforms, including hard-concrete pin families associated with GT-3, GT-6 & GT-9 equipment. The correct family should always be matched to the tool being used.

For practical background on matching fastening hardware to the actual connection, see the Fastener Guide Bolts Screws Anchors.

Why Choose ICCONS® Collated Ballistic Drive Pins?

Improve Penetration into Hard Materials

Hard concrete can expose the limitations of a pin that isn't designed for the receiving material. The ballistic-point profile is designed to generate greater penetrating power in compatible hard-material applications.

This makes ballistic pins particularly relevant where suitable hard concrete or steel forms the receiving material.

Reduce the Risk of Pin Collapse

Penetration performance depends on more than the shape of the point. ICCONS® combines its ballistic-point design with a strengthened shank intended to reduce the possibility of pin collapse when fastening into demanding materials.

The result is a purpose-specific pin rather than simply a conventional collated fastener with a different tip.

Keep Repetitive Fixing Moving

A framing run containing dozens of fixing positions places different demands on consumables from a one-off attachment. ICCONS® hard-concrete ballistic gas-tool pins use 10 collated pins per strip, supporting progressive fastening with compatible equipment.

This can reduce individual pin handling across repeated direct-fixing work.

Match the Pin to the Tool Platform

Collated pins should never be selected from appearance or length alone. ICCONS® manufactures different ballistic-point families for particular gas-tool platforms.

Confirm the exact tool model, compatible pin family, required pin length & associated consumables before materials are issued to site.

Work Across Suitable Concrete & Steel

The base material remains central to direct-fastener selection. Compatible ICCONS® ballistic-point ranges are intended for steel, concrete & hard concrete applications.

The actual substrate, fixture & fastening requirements should be checked before installation rather than assuming one pin suits every concrete or steel connection.

Common Applications

Bottom-Plate Fixing

Repeated bottom-plate fastening requires accurate layout as well as suitable consumables. ICCONS® identifies bottom-plate fixing among applications for its ballistic-point direct-fastening systems.

Establish the wall line, plate position & fixing requirements before repetitive installation begins. Measuring & Leveling Tools can assist with maintaining consistent framing lines & fixture positions.

Hard-Concrete Fastening

Dense or hard concrete can demand more penetrating performance from a direct-fastening pin. ICCONS® hard-concrete ballistic-point pins are specifically designed for compatible applications involving these more demanding base materials.

Check the actual concrete & installation requirements before selecting the pin family or length.

Steel Fixing

Steel presents a different fastening condition from concrete even when the same tool family can work with both. Suitable ICCONS® ballistic-point pins can be used for compatible steel applications.

Steel thickness, condition & the fixture being retained should form part of the selection decision.

Commercial Framing

Framing work can involve long runs of similar fixings across concrete or steel interfaces. Collated ballistic pins can support compatible direct-fastening work where the specified fixture, tool & receiving material suit the system.

Where direct fastening isn't the appropriate method, Anchor Bolts provides a pathway into mechanical anchoring options.

Fit-Out Work

Commercial fit-outs regularly bring concrete, steel & different fixture types into the same working area. Identifying the receiving material before the fixing run begins helps crews avoid treating every location as though it requires the same pin.

Where conventional fastening is required elsewhere on the project, Bolts & Fasteners provides related hardware options.

Repetitive Construction Fixing

High-volume direct fastening makes consumable preparation important before the first pin is fired. Collated strips allow compatible tools to progress through repeated fixing positions without individually loading every pin.

For practical preparation before larger site programs, see Spring Jobsite Prep Getting Your Gear Ready.

Product Selection Guide

Start with the tool platform & receiving material before considering pin length. ICCONS® ballistic-point products are available across different direct-fastening systems, so visually similar pins shouldn't be assumed to be interchangeable.

Selection Point

What to Confirm

Why It Matters

Base material

Concrete, hard concrete or steel

Establishes the fastening conditions

Tool platform

Exact ICCONS® or compatible tool model

Pin families vary between tools

Pin family

Compatible ballistic-point consumable

Prevents mismatched pins & equipment

Pin length

Required length for the connection

Longer isn't automatically more suitable

Collation

Compatible strip configuration

Must feed correctly through the tool

Fixture

Material, thickness & fixing requirement

Forms part of the complete connection

Quantity

Number of planned fixing positions

Helps prepare sufficient consumables

Ballistic Point or Standard Collated Pin?

The condition of the receiving material should guide the choice. Standard pins can suit compatible general fastening work, while ballistic-point variants are designed for applications where greater penetration into harder material is required.

Don't automatically substitute ballistic pins for standard pins across every fixing location. Select the configuration appropriate to the base material, fixture & tool.

Which ICCONS® Ballistic Pin Family Do I Need?

Start by identifying the fastening tool already allocated to the work. ICCONS® manufactures ballistic-point consumables across multiple gas-tool platforms rather than using one universal collated pin.

For example, compatible GT-6 hard-concrete ballistic pins are available for GT-3, GT-6 & specified Powers gas tools, while the GT-9 system has its own associated hard-concrete ballistic consumables.

Confirm current compatibility for the exact pin & equipment combination before ordering.

What Pin Length Should I Select?

Length should be determined from the complete fixing arrangement rather than the fixture thickness alone. ICCONS® ballistic-point families are offered in different pin lengths according to the tool system & intended application.

Use the appropriate product information for the selected pin family when establishing the required length.

Are Ballistic Pins Only for Hard Concrete?

No. Suitable ballistic-point ranges can also be used for compatible steel applications. ICCONS® identifies steel, concrete & hard concrete across its hard-material ballistic pin systems.

Suitability still depends on the particular pin, tool, fixture & installation conditions.

When Is a Different Fastener More Appropriate?

Direct fastening doesn't replace every screw or mechanical anchor. Where the connection requires a drilled anchor, screw fixing or another specified fastening method, use the product appropriate to that connection.

For those situations, compare Screws & Anchors with Anchor Bolts according to the fixture & receiving material.

Expert Tips

Identify the Base Material First

A concrete surface can look straightforward while presenting substantially different fastening conditions beneath the surface. Establish whether the receiving material is concrete, hard concrete or steel before selecting the ballistic pin.

Match the Pin Family to the Tool

A collated strip that appears to fit isn't sufficient confirmation of compatibility. Check the ICCONS® pin family against the exact fastening-tool model before loading or ordering consumables.

Keep Standard & Ballistic Pins Separated

Similar-looking collated consumables can become difficult to distinguish once several packs are open. Keep standard pins, ballistic pins & different lengths clearly separated with their product identification visible.

Small Parts Organisers can help keep related conventional fasteners & smaller installation components organised around the work area.

Don't Default to the Longest Pin

Additional length doesn't automatically produce a better fixing. The correct pin needs to suit the fixture, receiving material & direct-fastening system.

Confirm the required pin configuration before ordering project quantities.

Treat Steel as a Specific Fixing Condition

Not every steel section presents the same direct-fastening conditions. Steel thickness, location, fixture & project requirements should be checked before using a ballistic-point pin.

Where the connection instead requires conventional threaded hardware, Bolts & Fasteners provides an alternative fastening route.

Consider the Entire Connection

Greater penetrating power doesn't remove the need to assess the component being fixed. The fixture, ballistic pin, receiving material & installation equipment need to form a compatible fastening arrangement.

For further practical guidance on this principle, read Why Good Fasteners Matter More Than the Tool You Drive Them With.

Maintain the Fastening Equipment

Reliable pin feeding & consistent operation depend on the condition of the tool as well as the consumables. Follow the manufacturer's inspection, cleaning & maintenance requirements, particularly before high-volume fixing work.

Sidebar
Filter
  • 10
  • 15
  • 20
  • 25
  • 30
  • 50
  • Featured
  • Most relevant
  • Best selling
  • Alphabetically, A-Z
  • Alphabetically, Z-A
  • Price, low to high
  • Price, high to low
  • Date, old to new
  • Date, new to old
Sort

Sort by:

  • Featured
  • Most relevant
  • Best selling
  • Alphabetically, A-Z
  • Alphabetically, Z-A
  • Price, low to high
  • Price, high to low
  • Date, old to new
  • Date, new to old

Showing 0 of 0 products

No products found
Use fewer filters or clear all

Why Buy ICCONS® Collated Ballistic Drive Pins From Industrial Shed?

Direct-fastening consumables are easier to procure when the tool, pin family, receiving material & required length are considered together. Industrial Shed supports builders, framing crews, commercial fit-out contractors, maintenance teams & trade users sourcing ICCONS® fastening products for demanding concrete & steel work.

Clear identification becomes particularly valuable when standard & ballistic pins are carried on the same project. Ordering around the tool platform, pin type, required length & expected fixing quantity helps keep the correct consumables with the crew using them.

For assistance with recurring fastening requirements & trade purchasing, Trade support Solutions can help with product & supply enquiries.

For qualifying stocked consumables required around active projects, review Same day dispatch for current dispatch arrangements.

Match Harder Base Materials with the Right Pin

When concrete becomes harder or the fixing moves to steel, the pin needs to suit the change in fastening conditions. Identify the receiving material, tool platform, fixture & required pin configuration before the fixing run begins.

For repetitive installation, prepare the correct collated consumables alongside the tool before work starts. Keeping standard & ballistic-point pins clearly identified helps crews maintain the intended fastening setup as materials change across the project.

Choose ICCONS® Collated Ballistic Drive Pins for compatible direct fastening where hard concrete or steel requires a purpose-designed ballistic-point pin.

Frequently Asked Questions

The ballistic-point geometry is designed to generate greater penetrating power, while the strengthened shank helps reduce the possibility of pin collapse during compatible hard-material fastening.

Yes. ICCONS® offers hard-concrete ballistic-point pins specifically designed for compatible direct-fastening applications involving hard concrete.

Yes. Suitable ICCONS® ballistic-point ranges are intended for compatible steel fastening as well as concrete applications.

Compatible ICCONS® hard-concrete gas-tool ballistic pins are supplied as 10 collated pins per strip.

No. Compatibility varies between pin families & tool platforms. Confirm the exact pin against the fastening tool before ordering or installation.

Suitable ICCONS® ballistic-point systems can be used for compatible bottom-plate fastening where the fixture, receiving material & tool configuration are appropriate.

Brands

ICCONS®

ICCONS®

Solutions Built for Tradies: How Industrial Shed Powers Your Success

At Industrial Shed, we understand that reliable tools are the backbone of any successful project. That’s why we stock durable, high-performance equipment designed to handle tough jobs without breakdowns or delays. Trade professionals across the Mornington Peninsula and Melbourne trust our range for its dependability and long-lasting quality.

As an independent tool retailer, we take pride in offering only the most trusted brands to ensure you get the job done right the first time. Whether you need hand tools, power tools, or workshop essentials, our carefully curated selection guarantees reliability, so you can focus on your work with confidence.

Struggling to locate specialised tools for your trade? Industrial Shed has you covered. Our extensive range ensures trade professionals across the Mornington Peninsula and Melbourne have access to niche products without the hassle of searching multiple suppliers. From unique fasteners to specialty power tools, we make it simple to find exactly what you need.

As a local, independent tool retailer, we understand the challenges tradies face in sourcing specific equipment. Our team is here to provide expert advice and personalised support, ensuring you have the right tools for the job—every time.

At Industrial Shed, we know the trade industry inside out. As an independent tool shop based on the Mornington Peninsula, we are deeply familiar with the needs of local tradies and construction professionals. Our curated selection of tools is designed to meet the demands of both large-scale projects and everyday trade work.

Our team provides tailored advice and practical solutions to ensure you’re equipped with the right tools and equipment for every job. With years of experience serving Melbourne and Mornington Peninsula professionals, we are your trusted partner for all things trade.

At Industrial Shed, we simplify your workday by offering everything you need under one roof. From hand tools and power tools to fasteners, workwear, and safety gear, our one-stop shop helps trade professionals save valuable time. No more running between multiple suppliers—we have it all.

Serving the Mornington Peninsula and Melbourne regions, we take pride in making your tool shopping experience efficient and straightforward. As an independent retailer, we focus on delivering high-quality products with the service and support you can rely on.

Your safety is our priority at Industrial Shed. We stock a full range of durable workwear, safety equipment, and PPE to keep you and your team protected on-site. From hi-vis clothing to helmets and gloves, our collection is designed with the toughest conditions in mind.

Trade professionals on the Mornington Peninsula and in Melbourne trust us for reliable safety solutions. With expert advice and a commitment to quality, we make sure you have the gear you need to stay safe while getting the job done.

Demanding projects require tools you can trust. At Industrial Shed, our heavy-duty tools and equipment are built to handle the toughest challenges on any worksite. Whether it’s power tools, concrete tools, or lifting gear, we’ve got the equipment you need to perform.

Serving trade professionals across the Mornington Peninsula and Melbourne, we specialise in high-performance tools that stand up to wear and tear. As an independent tool retailer, we provide personalised service to ensure you have the strength and reliability to succeed.

At Industrial Shed, we believe that balancing cost and performance shouldn’t mean compromising on quality. Our range of high-performance tools is competitively priced to ensure Melbourne and Mornington Peninsula tradies stay within budget while using the best gear.

From hand tools to power tools, we stock trusted brands that deliver value and durability. As an independent retailer, we’re committed to providing trade professionals with reliable tools that won’t break the bank—or let you down.

At Industrial Shed, we understand the importance of reliable power on the job. Our range of generators and portable power solutions is designed to keep your tools and equipment running smoothly, no matter where you’re working.

From small repairs to large-scale projects across the Mornington Peninsula and Melbourne, our power solutions are trusted by trade professionals. As your local tool shop, we offer expert advice to ensure you’re equipped with the right tools for uninterrupted productivity.

Avoid costly project delays with Industrial Shed’s consistently stocked inventory. We ensure trade professionals across the Mornington Peninsula and Melbourne have quick access to the tools, fasteners, and supplies they need to get the job done on time.

As an independent retailer, we pride ourselves on being a reliable partner for tradies, offering high-quality products and personalised service. When you shop with us, you’ll never have to worry about supply shortages holding you back.

At Industrial Shed, we’re more than just a tool retailer—we’re your partner in productivity. Serving Melbourne and the Mornington Peninsula, we provide trade professionals with the trusted tools, advice, and support they need to succeed on every project.

Our independent approach ensures we prioritise your needs, from reliable product recommendations to tailored solutions. With our high-quality gear and expert service, you can count on us to help you work smarter and achieve more.