► Finer | 2pc Split Shaft Collars

High-Strength Clamping Without Shaft Damage When shaft-mounted components must be positioned accurately without marking or deforming the shaft, 2pc split shaft collars provide a reliable solution. Their two-piece design allows collars to be installed or removed without sliding over shaft ends, making them ideal for maintenance, retrofits & precision setups....

High-Strength Clamping Without Shaft Damage

When shaft-mounted components must be positioned accurately without marking or deforming the shaft, 2pc split shaft collars provide a reliable solution. Their two-piece design allows collars to be installed or removed without sliding over shaft ends, making them ideal for maintenance, retrofits & precision setups.

This collection features Finer 2pc split shaft collars engineered for applications where uniform clamping force & repeatable positioning are critical. By distributing load evenly around the shaft circumference these collars achieve strong holding power without relying on set screws.

Across Australian workshops plant rooms & industrial assemblies 2pc split shaft collars are commonly specified within Shaft Collars & Locking Bushings applications supporting axial positioning, travel limits & component spacing on rotating or linear shafts.

They are frequently used alongside Couplings & Clutches, providing fixed axial reference points that prevent coupling drift under vibration or torque variation.

In bearing-supported systems 2pc split collars are often installed adjacent to Mounted Bearing Units, helping retain bearing position once alignment is set.

For adjustable mechanisms or guided motion assemblies these collars are commonly paired with Rod Ends, Plain Bearings & Bushings, acting as precise stops without damaging rods or shafts.

Secure clamping relies on consistent fastening. Installation is typically completed using Bolts & Fasteners, allowing even tightening across both collar halves.

Where drivetrains require fixed spacing these collars may also complement Rigid Couplings, maintaining component separation under load.

What’s in This Collection:

► Two-piece split shaft collars
‣ Allows installation without removing shaft-mounted components

► Full-circumference clamping design
‣ Provides strong holding power without shaft damage

► Precision-machined collar halves
‣ Ensures consistent alignment & repeatability

► Standard bore sizing
‣ Fits common shaft diameters

► Industrial-grade steel construction
‣ Suitable for continuous-duty environments

 

Sidebar

Product Type

Size

Show all

Brands

Price

$
to
$
Filter
  • 10
  • 15
  • 20
  • 25
  • 30
  • 50
  • Featured
  • Most relevant
  • Best selling
  • Alphabetically, A-Z
  • Alphabetically, Z-A
  • Price, low to high
  • Price, high to low
  • Date, old to new
  • Date, new to old
Sort

Sort by:

  • Featured
  • Most relevant
  • Best selling
  • Alphabetically, A-Z
  • Alphabetically, Z-A
  • Price, low to high
  • Price, high to low
  • Date, old to new
  • Date, new to old
  • Shaft Collar 2pc Split (Clamp Type) 14mm Steel Black Oxide Coated | FSC-14-SP
    Shaft Collar 2pc Split (Clamp Type) 14mm Steel Black Oxide Coated | FSC-14-SP
    Shaft Collar 2pc Split (Clamp Type) 14mm Steel Black Oxide Coated | FSC-14-SP built for serious trade use. Reliable performance, zero fluff — fit for workshops across the Mornington Peninsula and beyond. Backed by Industrial Shed service and support.► Key Features‣ Trade-tough construction for...
    $16.42
    $16.42
  • Shaft Collar 2pc Split (Clamp Type) 12mm Steel Black Oxide Coated | FSC-12-SP
    Shaft Collar 2pc Split (Clamp Type) 12mm Steel Black Oxide Coated | FSC-12-SP
    Shaft Collar 2pc Split (Clamp Type) 12mm Steel Black Oxide Coated | FSC-12-SP built for serious trade use. Reliable performance, zero fluff — fit for workshops across the Mornington Peninsula and beyond. Backed by Industrial Shed service and support.► Key Features‣ Trade-tough construction for...
    $17.22
    $17.22
  • Shaft Collar 2pc Split (Clamp Type) 10mm Steel Black Oxide Coated | FSC-10-SP
    Shaft Collar 2pc Split (Clamp Type) 10mm Steel Black Oxide Coated | FSC-10-SP
    Shaft Collar 2pc Split (Clamp Type) 10mm Steel Black Oxide Coated | FSC-10-SP built for serious trade use. Reliable performance, zero fluff — fit for workshops across the Mornington Peninsula and beyond. Backed by Industrial Shed service and support.► Key Features‣ Trade-tough construction for...
    $19.86
    $19.86
  • Shaft Collar 2pc Split (Clamp Type) 1/4" Steel Black Oxide Coated | FSC-1/4-SP
    Shaft Collar 2pc Split (Clamp Type) 1/4" Steel Black Oxide Coated | FSC-1/4-SP
    Shaft Collar 2pc Split (Clamp Type) 1/4" Steel Black Oxide Coated | FSC-1/4-SP built for serious trade use. Reliable performance, zero fluff — fit for workshops across the Mornington Peninsula and beyond. Backed by Industrial Shed service and support.► Key Features‣ Trade-tough construction for...
    $21.98
    $21.98
  • Shaft Collar 2pc Split (Clamp Type) 1/2" Steel Black Oxide Coated | FSC-1/2-SP
    Shaft Collar 2pc Split (Clamp Type) 1/2" Steel Black Oxide Coated | FSC-1/2-SP
    Shaft Collar 2pc Split (Clamp Type) 1/2" Steel Black Oxide Coated | FSC-1/2-SP built for serious trade use. Reliable performance, zero fluff — fit for workshops across the Mornington Peninsula and beyond. Backed by Industrial Shed service and support.► Key Features‣ Trade-tough construction for...
    $24.36
    $24.36
  • Shaft Collar 2pc Split (Clamp Type) 1" Steel Black Oxide Coated | FSC-1-SP
    Shaft Collar 2pc Split (Clamp Type) 1" Steel Black Oxide Coated | FSC-1-SP
    Shaft Collar 2pc Split (Clamp Type) 1" Steel Black Oxide Coated | FSC-1-SP built for serious trade use. Reliable performance, zero fluff — fit for workshops across the Mornington Peninsula and beyond. Backed by Industrial Shed service and support.► Key Features‣ Trade-tough construction for...
    $34.16
    $34.16
  • Shaft Collar 2pc Split (Clamp Type) 1-7/8 Inch Steel Black Oxide Coated | FSC-1-7/8-SP
    Shaft Collar 2pc Split (Clamp Type) 1-7/8 Inch Steel Black Oxide Coated | FSC-1-7/8-SP
    Shaft Collar 2pc Split (Clamp Type) 1-7/8 Inch Steel Black Oxide Coated | FSC-1-7/8-SP built for serious trade use. Reliable performance, zero fluff — fit for workshops across the Mornington Peninsula and beyond. Backed by Industrial Shed service and support.► Key Features‣ Trade-tough construction...
    $54.56
    $54.56
  • Shaft Collar 2pc Split (Clamp Type) 1-5/8" Steel Black Oxide Coated | FSC-1-5/8-SP
    Shaft Collar 2pc Split (Clamp Type) 1-5/8" Steel Black Oxide Coated | FSC-1-5/8-SP
    Shaft Collar 2pc Split (Clamp Type) 1-5/8" Steel Black Oxide Coated | FSC-1-5/8-SP built for serious trade use. Reliable performance, zero fluff — fit for workshops across the Mornington Peninsula and beyond. Backed by Industrial Shed service and support.► Key Features‣ Trade-tough construction for...
    $48.48
    $48.48
  • Shaft Collar 2pc Split (Clamp Type) 1-3/8" Steel Black Oxide Coated | FSC-1-3/8-SP
    Shaft Collar 2pc Split (Clamp Type) 1-3/8" Steel Black Oxide Coated | FSC-1-3/8-SP
    Shaft Collar 2pc Split (Clamp Type) 1-3/8" Steel Black Oxide Coated | FSC-1-3/8-SP built for serious trade use. Reliable performance, zero fluff — fit for workshops across the Mornington Peninsula and beyond. Backed by Industrial Shed service and support.► Key Features‣ Trade-tough construction for...
    $42.38
    $42.38
  • Shaft Collar 2pc Split (Clamp Type) 1-8" Steel Black Oxide Coated | FSC-1-1/8-SP
    Shaft Collar 2pc Split (Clamp Type) 1-8" Steel Black Oxide Coated | FSC-1-1/8-SP
    Shaft Collar 2pc Split (Clamp Type) 1-8" Steel Black Oxide Coated | FSC-1-1/8-SP built for serious trade use. Reliable performance, zero fluff — fit for workshops across the Mornington Peninsula and beyond. Backed by Industrial Shed service and support.► Key Features‣ Trade-tough construction for...
    $36.28
    $36.28
  • Shaft Collar 2pc Split (Clamp Type) 1-1/4" Steel Black Oxide Coated | FSC-1-1/4-SP
    Shaft Collar 2pc Split (Clamp Type) 1-1/4" Steel Black Oxide Coated | FSC-1-1/4-SP
    Shaft Collar 2pc Split (Clamp Type) 1-1/4" Steel Black Oxide Coated | FSC-1-1/4-SP built for serious trade use. Reliable performance, zero fluff — fit for workshops across the Mornington Peninsula and beyond. Backed by Industrial Shed service and support.► Key Features‣ Trade-tough construction for...
    $38.66
    $38.66
  • Shaft Collar 2pc Split (Clamp Type) 1-1/2" Steel Black Oxide Coated | FSC-1-1/2-SP
    Shaft Collar 2pc Split (Clamp Type) 1-1/2" Steel Black Oxide Coated | FSC-1-1/2-SP
    Shaft Collar 2pc Split (Clamp Type) 1-1/2" Steel Black Oxide Coated | FSC-1-1/2-SP built for serious trade use. Reliable performance, zero fluff — fit for workshops across the Mornington Peninsula and beyond. Backed by Industrial Shed service and support.► Key Features‣ Trade-tough construction for...
    $47.14
    $47.14

Designed for Precise Shaft Control Across Australian Conditions

Industrial equipment across Australia operates under vibration load cycling & frequent maintenance requirements. In these environments shaft damage from set screws or uneven clamping can lead to misalignment or premature wear. Two-piece split shaft collars reduce this risk by gripping evenly while remaining easy to reposition.

These collars are widely used across manufacturing facilities in Victoria mining support equipment in Western Australia agricultural machinery in regional New South Wales & infrastructure assets throughout Queensland. From conveyors to drive assemblies they support reliable axial control where precision matters.

Within complete systems 2pc split shaft collars often complement Needle Roller Bearings or Cylindrical Roller Bearings, allowing bearings to manage radial loads while collars maintain axial location. Correct collar selection combined with proper installation improves system stability & reduces maintenance intervention.

Industrial Shed supplies this range with Same day dispatch, supporting urgent builds & breakdown repairs. Ongoing confidence is reinforced through Warranty & parts Support for trade & industrial users.

Key Advantages at a Glance

► Installs without sliding over shaft ends
► Clamps securely without damaging shafts
► Ideal for precision positioning & maintenance access
► Backed by local stock trade support & fast Australian dispatch

Achieve Secure Shaft Positioning Without Compromise

When applications demand strong clamping precise alignment & easy installation this collection delivers a proven solution for shaft control. Finer 2pc split shaft collars support reliable performance across Australian industrial environments. Order online for fast dispatch or contact Industrial Shed for trade pricing bulk supply & application guidance.

Frequently Asked Questions

It provides uniform clamping force without marring the shaft & allows installation anywhere along the shaft.

Yes. They offer higher holding power due to full circumferential clamping.

Yes. They can be removed & reinstalled without affecting shaft condition.

Brands

Finer Power Transmissions

Finer Power Transmissions