► Chipping Hammers & Brushes

Clean Welds Start Here A clean weld isn’t finished until the slag’s off and the surface is inspection-ready. Our ITM Chipping Hammers & Brushes are built for tough slag removal, spatter control & post-weld cleanup—used across fabrication shops, structural sites, pipe welding rigs, and repair bays. Whether you're running flux-core on...

Clean Welds Start Here

A clean weld isn’t finished until the slag’s off and the surface is inspection-ready. Our ITM Chipping Hammers & Brushes are built for tough slag removal, spatter control & post-weld cleanup—used across fabrication shops, structural sites, pipe welding rigs, and repair bays. Whether you're running flux-core on site or stick welding in the shop, these are the tools that prep, clean & finish every joint.

This collection covers spiral-handled chipping hammers, carbon & stainless wire brushes, and multi-piece cleaning kits—everything designed to last under heat, grit, and repeat impacts. Trusted by boilermakers, fitters, steel fabricators, and anyone who knows welding isn't done when the arc stops. We stock gear that stands up to real-world trade conditions, from ITM, Weldclass, and other industry-reliable brands.

No fluff. Just the tools you need to leave clean, solid welds behind—every single time.

What’s in This Collection:

► ITM Chipping Hammers
‣ Spiral spring or straight-handled for heavy slag removal
► ITM Carbon, Stainless & Brass Wire Brushes
‣ For MIG, stick & stainless weld cleanup without contamination
► ITM Multi-Tool Cleaning Kits
‣ Perfect for site crews, workshops & post-weld finish work
► ITM Replacement Brush Heads & Hammer Spares
‣ Keep your cleanup tools sharp and field-ready
► ITM Trade Combo Packs
‣ Value sets for fabricators, apprentices & mobile repair

Sidebar
Filter
  • 10
  • 15
  • 20
  • 25
  • 30
  • 50
  • Featured
  • Most relevant
  • Best selling
  • Alphabetically, A-Z
  • Alphabetically, Z-A
  • Price, low to high
  • Price, high to low
  • Date, old to new
  • Date, new to old
Sort

Sort by:

  • Featured
  • Most relevant
  • Best selling
  • Alphabetically, A-Z
  • Alphabetically, Z-A
  • Price, low to high
  • Price, high to low
  • Date, old to new
  • Date, new to old
  • Kincrome - K6360 - Industrial Shed
    Kincrome - Wire Brush Set Medium 3PCE | K6360
    Kincrome - Wire Brush Set Medium 3PCE | K6360 The Kincrome Wire Brush Set Medium 3PCE is a genuine Kincrome wire brush set built for trade-grade performance and backed by Kincrome's guarantee. ► Key Features Assorted wire brushes for cleaning and prep Durable bristles...
    $16.70
    $21.60
    $16.70
  • Kincrome - K6370 - Industrial Shed
    Kincrome - Heavy-duty Wire Brush Set | K6370
    Kincrome Wire Brush Set Large 3 Piece | K6370 The Kincrome Wire Brush Set (Large) – 3 Piece is made for bigger cleaning tasks, with three different brush materials and 3 rows of bristles per brush for easier scrubbing. Great for workshop, fabrication and...
    $35.90
    $62.30
    $35.90
  • SP Air - Air Tool Needle Scaler - Composite | SP-2472
    SP Air - Air Tool Needle Scaler - Composite | SP-2472
    SP Air - Air Tool Needle Scaler - Composite | SP-2472 The SP Air Air Tool Needle Scaler - Composite (SP-2472) is a professional-grade pneumatic needle scaler designed for the fast removal of rust, mill scale, paint, weld slag, and corrosion from metal surfaces....
    $532.35
    $775.09
    $532.35
  • ITM - M7 CHISEL, FLAT, SUIT AIR CHIPPING HAMMERS, 14.8MM HEX, 25MM X 260MM | M7A-SN9201
    M7 - Chisel - Flat - Suit Air Chipping Hammers - 14.8mm Hex - 25mm x 260mm | M7A-SN9201
    M7 Flat Chisel to Suit Air Chipping Hammers 14.8mm Hex 25mm x 260mm | M7A-SN9201 The M7 Flat Chisel is designed to suit air chipping hammers with a 14.8mm hex shank. Measuring 25mm x 260mm, this flat chisel is built for chipping, surface preparation,...
    $58.00
    $50.86
    $58.00
  • Weldclass - Wire Brush Cup Twist-Knot 120mm M14x2 Mild-Steel | WC-06464
    Weldclass - Wire Brush Cup Twist-Knot 120mm M14x2 Mild-Steel | WC-06464
    Weldclass - Wire Brush Cup Twist-Knot 120mm M14x2 Mild-Steel | WC-06464 A 120mm twist-knot mild steel cup brush for angle grinders, for aggressive removal of rust, scale and burrs. Weldclass is a 100% Australian-owned company whose products are developed for Australian welders and metal...
    $74.00
    $69.91
    $74.00
  • Weldclass - Wire Brush Bevel Twist-Knot 125mm Opti-5 M14x2 Mild-Steel | WC-04814
    Weldclass - Twist-Knot Bevel Wire Brush 125mm OPTI-5 M14x2 Mild Steel | WC-04814
    Weldclass - Twist-Knot Bevel Wire Brush 125mm OPTI-5 M14x2 Mild Steel | WC-04814 Twist-knot bevel wire brush, 125mm, mild steel wire, M14x2 thread. Angled saucer shape for aggressive removal of rust, scale, burrs and paint on angle grinders. OPTI-5 series, designed for 125mm/5" grinders....
    $52.50
    $49.90
    $52.50
  • ITM - M7 NEEDLE SET (14 PCE) 4MM X 180 NEEDLES TO SUIT SN-2128 | M7A-SN2128T05B
    M7 - Needle Set 4mm x 180 Needles to Suit SN2128 Needle Scaler | M7A-SN2128T05B
    M7 Needle Set 14 Piece 4mm x 180mm to Suit SN-2128 | M7A-SN2128T05B The M7 Needle Set is a 14 piece replacement needle set designed to suit the M7-SN2128 needle scaler. With 4mm x 180mm needles, this set is made for surface cleaning, rust...
    $34.00
    $30.06
    $34.00
  • Dymaxion - Wire Brush 4 Row Wooden Handle. INOX for Stainless Steel | 4RWHBSS
    Dymaxion - Wire Brush 4 Row Wooden Handle. INOX for Stainless Steel | 4RWHBSS
    Bordo Dymaxion 4 Row Wire Brush Wooden Handle INOX for Stainless Steel | 4RWHBSS The Bordo Dymaxion 4 Row Wire Brush (4RWHBSS) is designed for cleaning and surface preparation on stainless steel without contamination. Featuring INOX stainless steel wire bristles, it ensures safe use...
    $3.81
    $4.76
    $3.81
  • ITM - NPK AIR CHIPPING HAMMER 3200 BPM 18MM PISTON DIA 75MM STROKE | NPK-AA0SP(H)
    M7 - Air Chipping Hammer 3200 Bpm 18mm Piston Dia 75mm Stroke | NPK-AA0SP(H)
    M7 Air Chipping Hammer - 3200 BPM - 18mm Piston Diameter - 75mm Stroke | NPK-AA0SP(H) The M7 NPK-AA0SP(H) Air Chipping Hammer is a professional Japanese-made pneumatic hammer designed for chipping, scaling, weld cleanup, rivet removal and light demolition applications. Featuring an 18mm piston...
    $1,113.00
    $1,013.38
    $1,113.00
  • ITM - M7 AIR CHIPPING HAMMER, D TYPE, 78MM STROKE 2300BPM, 14.8MM HEX | M7-SN3222
    M7 - Air Chipping Hammer - D Type - 78mm Stroke 2300bpm - 14.8mm Hex | M7-SN3222
    M7 Air Chipping Hammer - D Type - 78mm Stroke - 2300 BPM - 14.8mm Hex | M7-SN3222 The M7 Air Chipping Hammer is a heavy-duty pneumatic tool built for demanding industrial chipping, scaling, demolition, and material removal applications. Featuring a forged steel body,...
    $1,309.00
    $1,517.88
    $1,309.00
  • ITM - M7 NEEDLE SCALER, 5500 BPM, 32MM STROKE, 3 X 123MM NEEDLES, STRAIGHT STYLE | M7-SN1288
    M7 - Needle Scaler - 5500 Bpm - 32mm Stroke - 3mm x 123mm Needles - Straight Style | M7-SN1288
    M7 Needle Scaler - 5500 BPM - 32mm Stroke - 3mm x 123mm Needles - Straight Style | M7-SN1288 The M7 Needle Scaler is engineered for aggressive surface preparation and cleaning applications. Delivering 5500 blows per minute and a 32mm stroke, this straight-style scaler...
    $339.00
    $390.00
    $339.00
  • ITM - M7 CHISEL, POINT, SUIT AIR CHIPPING HAMMERS, 14.8MM HEX, 260MM LONG | M7A-SN9203
    M7 - Chisel - Point - Suit Air Chipping Hammers - 14.8mm Hex - 260mm Long | M7A-SN9203
    M7 Point Chisel to Suit Air Chipping Hammers 14.8mm Hex 260mm Long | M7A-SN9203 The M7 Point Chisel is designed for use with air chipping hammers requiring a 14.8mm hex shank. With a 260mm length and pointed chisel profile, it is suited to targeted...
    $58.00
    $50.86
    $58.00
  • Weldclass - Wire Brush Hand 1-Row Plastic Handle Stainless-Steel Green | TO-3204
    Weldclass - Hand Wire Brush 1-Row Plastic Handle Stainless-Steel Green | TO-3204
    Weldclass - Hand Wire Brush 1-Row Plastic Handle Stainless-Steel Green | TO-3204 Single-row crimped stainless-steel wire hand brush with a green plastic handle, made in Europe from high-tensile tyre-cord wire. Used for removing rust, slag and scale. Weldclass is a 100% Australian-owned company whose...
    $16.30
    $15.50
    $16.30
  • Weldclass - Wire Brush Cup Twist-Knot 92mm Opti-5 M14x2 Stainless-Steel | WC-06463
    Weldclass - Wire Brush Cup Twist-Knot 92mm OPTI-5 M14x2 Stainless-Steel | WC-06463
    Weldclass - Wire Brush Cup Twist-Knot 92mm OPTI-5 M14x2 Stainless-Steel | WC-06463 A 92mm twist-knot stainless steel cup brush for angle grinders, for aggressive removal of rust, scale and burrs. Weldclass is a 100% Australian-owned company whose products are developed for Australian welders and...
    $91.00
    $85.90
    $91.00
  • Makita Wire Brush Set Tough Cleaning Power SKU D-66070Makita - Wire Brush Set 3Pc - 6mm Shank | D-66070
    Makita - Wire Brush Set 3Pc - 6mm Shank | D-66070
    Wire Brush Set 3Pc - 6mm Shank | D-66070 The Makita Wire Brush Set 3Pc - 6mm Shank is the genuine article — made to the same standard as the tool it fits, and priced 10% under RRP at Industrial Shed. ► Key Features...
    $8.96
    $14.20
    $8.96
  • Makita - Brass Wire Brush 80 x 35 x 8mm Shank | D-67608Makita Brass Wire Brush Built for Tough Cleaning D-67608
    Makita - Brass Wire Brush 80 x 35 x 8mm Shank | D-67608
    Brass Wire Brush 80 x 35 x 8mm Shank | D-67608 When the job can’t wait for a part that almost fits, the genuine Makita Brass Wire Brush 80 x 35 x 8mm Shank drops straight in and gets you back to work. ►...
    $14.85
    $23.50
    $14.85
  • Kincrome - K6350 - Industrial Shed
    Kincrome - Wire Brush Set | K6350
    Kincrome Wire Brush Set Small 3 Piece | K6350 The Kincrome Wire Brush Set (Small) – 3 Piece is a handy cleaning kit for workshop and home use, giving you three different brush materials for tackling different surfaces and jobs. Each brush has 3...
    $11.90
    $20.93
    $11.90
  • Ingersoll Rand - Hex 4" Stroke Air Chipping Hammer - Diecast Aluminum Housing - Swan Neck Handle | W4A1
    Ingersoll Rand - Hex 4" Stroke Air Chipping Hammer - Diecast Aluminum Housing - Swan Neck Handle | W4A1
    Hex 4" Stroke Air Chipping Hammer - Diecast Aluminum Housing - Swan Neck Handle► Product OverviewThe Ingersoll Rand W4A1 is a chipping hammer built to the standard Ingersoll Rand has set for more than a century. Supplied to Industrial Shed through CAPS Australia, the...
    $3,722.24
    $3,722.24
  • Ingersoll Rand - Hex 3" Stroke Air Chipping Hammer - Diecast Aluminum Housing - Swan Neck Handle | W3A1
    Ingersoll Rand - Hex 3" Stroke Air Chipping Hammer - Diecast Aluminum Housing - Swan Neck Handle | W3A1
    Hex 3" Stroke Air Chipping Hammer - Diecast Aluminum Housing - Swan Neck Handle► Product OverviewThe Ingersoll Rand W3A1 is a chipping hammer built to the standard Ingersoll Rand has set for more than a century. Supplied to Industrial Shed through CAPS Australia, the...
    $3,631.45
    $3,631.45
  • Ingersoll Rand - Hex 2" Stroke Air Chipping Hammer - Diecast Aluminum Housing - Swan Neck Handle | W2A1
    Ingersoll Rand - Hex 2" Stroke Air Chipping Hammer - Diecast Aluminum Housing - Swan Neck Handle | W2A1
    Hex 2" Stroke Air Chipping Hammer - Diecast Aluminum Housing - Swan Neck Handle► Product OverviewThe Ingersoll Rand W2A1 is a chipping hammer built to the standard Ingersoll Rand has set for more than a century. Supplied to Industrial Shed through CAPS Australia, the...
    $3,542.86
    $3,542.86

Clean Finishes That Pass Inspection First Time

Slag, spatter & oxidation don’t stand a chance. Whether you’re cleaning up root passes on MIG joints or de-slagging a stick bead on site, these tools are made for the job. Built from high-carbon steel, stainless bristles, and impact-rated components, everything in this collection is ready to handle repeated abuse.

Trusted by welders, boilermakers, maintenance crews, and fabrication shops across Australia, these hammers & brushes help ensure that when the weld’s done—it actually looks done. And with fast dispatch, trade pricing, and bulk pack options, Industrial Shed has your back from arc start to cleanup.

► Workshop-tough hammers & brushes
► Options for carbon, flux-core & stainless welds
► Trusted by Aussie trades & fabrication crews

Frequently Asked Questions

Are your hammers spring-handled to reduce vibration?

Yes. Many include spiral handles designed to absorb shock and reduce operator fatigue.

Can these brushes be used on stainless steel welds?

Absolutely—just use stainless or brass bristles to avoid surface contamination.

Do you offer bulk packs or trade bundles?

Yes. We supply combo kits and multi-packs ideal for busy crews or shop restocks.

Brands

BBI

BBI
Bordo

Bordo
Champion

Champion
Dulux

Dulux
Dymaxion

Dymaxion
EHI

EHI
Excision

Excision
Geiger

Geiger
Groz

Groz
ICCONS®

ICCONS®
Ingersoll Rand

Ingersoll Rand
ITM

ITM
Kincrome

Kincrome
Kuani

Kuani
Makita Accessories

Makita Accessories
Mumme

Mumme
Other Brands

Other Brands
PFERD

PFERD
Precision Specialty Tools

Precision Specialty Tools
Shinano

Shinano
SP Air

SP Air
SP Tools

SP Tools
Stahlwille

Stahlwille
Sterling

Sterling
Sykes-Pickavant

Sykes-Pickavant
Toledo

Toledo
Trax

Trax
Typhoon Tools

Typhoon Tools
Union

Union
Weldclass

Weldclass
Weldtronic

Weldtronic

► Chipping Hammers & Brushes

Clean Welds Start Here

A clean weld isn’t finished until the slag’s off and the surface is inspection-ready. Our ITM Chipping Hammers & Brushes are built for tough slag removal, spatter control & post-weld cleanup—used across fabrication shops, structural sites, pipe welding rigs, and repair bays. Whether you're running flux-core on site or stick welding in the shop, these are the tools that prep, clean & finish every joint.

This collection covers spiral-handled chipping hammers, carbon & stainless wire brushes, and multi-piece cleaning kits—everything designed to last under heat, grit, and repeat impacts. Trusted by boilermakers, fitters, steel fabricators, and anyone who knows welding isn't done when the arc stops. We stock gear that stands up to real-world trade conditions, from ITM, Weldclass, and other industry-reliable brands.

No fluff. Just the tools you need to leave clean, solid welds behind—every single time.

What’s in This Collection:

► ITM Chipping Hammers
‣ Spiral spring or straight-handled for heavy slag removal
► ITM Carbon, Stainless & Brass Wire Brushes
‣ For MIG, stick & stainless weld cleanup without contamination
► ITM Multi-Tool Cleaning Kits
‣ Perfect for site crews, workshops & post-weld finish work
► ITM Replacement Brush Heads & Hammer Spares
‣ Keep your cleanup tools sharp and field-ready
► ITM Trade Combo Packs
‣ Value sets for fabricators, apprentices & mobile repair