► Carbitool | Chamfering Bits

Precision Bevel Cutting Tools for Clean Edge Finishing When you need crisp bevels & smooth edge transitions Carbitool Chamfering Bits deliver professional-grade precision. Built for joiners, cabinetmakers & furniture builders these TCT chamfer router bits produce consistent angled cuts on timber MDF & composite materials for perfect corner joints &...

Precision Bevel Cutting Tools for Clean Edge Finishing

When you need crisp bevels & smooth edge transitions Carbitool Chamfering Bits deliver professional-grade precision. Built for joiners, cabinetmakers & furniture builders these TCT chamfer router bits produce consistent angled cuts on timber MDF & composite materials for perfect corner joints & decorative edging.

Each bit is crafted from TCT (tungsten carbide tipped) or diamond-coated carbide, giving long-lasting sharpness & clean cutting under load. With angles from 22.5° to 80°, these bits are ideal for bevel cuts, chamfers, mitres & fine detailing. Bearing-guided designs keep every pass accurate & stable for smooth consistent edges.

Use these bits with Power Tools for bevel shaping or trimming. Combine with Grinders & Sanders for a flawless surface finish align cuts using Measuring & Layout Tools & store your bits safely with Tool Storage & Workbenches. Stay protected with Work Safety Protections. Every purchase includes Same day dispatch & full tool & equipment Care service support for lasting performance.

What’s in This Collection:

► 65° Chamfer Bit 40mm TCT
‣ Heavy-duty carbide bit ideal for large bevels & bold angled profiles in hardwood.

► Chamfer Bit Diamond Coated W/Bear
‣ Diamond-coated bit offering ultra-smooth finish & long edge retention for high-speed routing.

► Chamfering Bit 22.5° TCT
‣ Fine-angle cutter for subtle decorative edges & light joinery work.

► Chamfering Bit 30° TCT
‣ Reliable mid-angle bit for trimming panels frames & cabinet doors.

► Chamfering Bit 45° TCT 2 Flt 1/2 Shk W/Bear
‣ Classic 45-degree chamfer bit designed for precise bevel edges & clean trimming.

► Chamfering Bit 60.9° With Rad 1/2 Shk W/Bear
‣ Unique rounded chamfer bit combining curved transitions & smooth finish passes.

► Chamfer Bit 80° TCT 2 Flt 1/2 Shk W/Bear
‣ Specialty bit for steep angle cutting in joinery & architectural detailing.

► 65° Chamfer Bit TCT 2 Flt 1/2 Shk W/Bear
‣ Precision-ground bit providing sharp consistent bevels in timber & MDF.

► Chamfer Bit 32mm x 45° Chmfr TCT 1/2 Shk W/Bear
‣ Large 45° chamfer bit for heavy-duty beveling on thick furniture panels.

 

Sidebar

Refined by Clear all

Clear all

Product Type

Size

Brands

Clear all

Price

$
to
$
Filter
  • 10
  • 15
  • 20
  • 25
  • 30
  • 50
  • Featured
  • Most relevant
  • Best selling
  • Alphabetically, A-Z
  • Alphabetically, Z-A
  • Price, low to high
  • Price, high to low
  • Date, old to new
  • Date, new to old
Sort

Sort by:

  • Featured
  • Most relevant
  • Best selling
  • Alphabetically, A-Z
  • Alphabetically, Z-A
  • Price, low to high
  • Price, high to low
  • Date, old to new
  • Date, new to old
  • Carbitool - Chamfer Bit 32mm x 45 Chmfr TCT, 1/2 Shank W/bear | EY 916 B 1/2
    Carbitool - Chamfer Bit 32mm x 45 Chmfr TCT, 1/2 Shank W/bear | EY 916 B 1/2
    32mm x 45 / 1/2 Shk Chamfer Bit Chmfr Tct, W/Bear is a Carbitool item in the econocut router bits range listed by Industrial Shed for woodworking, machining & workshop buyers in Somerville VIC & across Australia SHANK INCH : 1/2 SHANK MM :...
    $21.34
    $21.34
  • Carbitool - 80 Deg Chamfer Bit TCT, W/bear | T 8180 B
    Carbitool - 80 Deg Chamfer Bit TCT, W/bear | T 8180 B
    80 Deg Chamfer Bit Tct, W/Bear is a Carbitool item in the edge forming bits wood range listed by Industrial Shed for woodworking, machining & workshop buyers in Somerville VIC & across Australia DESCRIPTION TYPE : Carbide Tipped ANGLE FROM VERTICAL : 80° ►...
    $70.74
    $70.74
  • Carbitool - 65 Deg Chamfer Bit TCT, 2Flt 1/2 Shank W/bear | T 8165 B 1/2
    Carbitool - 65 Deg Chamfer Bit TCT, 2Flt 1/2 Shank W/bear | T 8165 B 1/2
    1/2 Shk 65 Deg Chamfer Bit Tct, 2 Flt W/Bear is a Carbitool item in the router bits range listed by Industrial Shed for woodworking, machining & workshop buyers in Somerville VIC & across Australia DESCRIPTION TYPE : Carbide Tipped ANGLE FROM VERTICAL :...
    $70.74
    $70.74
  • Carbitool - 65 Deg Chamfer Bit 65 Deg TCT, 2Flt 1/2 Shank W/bear | TX 8165 B 1/2
    Carbitool - 65 Deg Chamfer Bit 65 Deg TCT, 2Flt 1/2 Shank W/bear | TX 8165 B 1/2
    65 Deg Chamfer Bit 65 Deg Tct, 2 Flt 1/2 Shk W/Bear is a Carbitool item in the edge forming bits wood range listed by Industrial Shed for woodworking, machining & workshop buyers in Somerville VIC & across Australia DESCRIPTION TYPE : Carbide Tipped...
    $104.92
    $117.42
    $104.92
  • Carbitool - 65 Deg Chamfer Bit 40mm TCT | T 8165 B
    Carbitool - 65 Deg Chamfer Bit 40mm TCT | T 8165 B
    65 Deg Chamfer Bit 40mm Tct is a Carbitool item in the edge forming bits wood range listed by Industrial Shed for woodworking, machining & workshop buyers in Somerville VIC & across Australia DESCRIPTION TYPE : Carbide Tipped ANGLE FROM VERTICAL : 65° ►...
    $70.74
    $70.74

Built for Accuracy Strength & Smooth Bevel Performance

Trusted by professionals across Australia Carbitool Chamfering Bits are engineered for precision edge finishing in cabinetry & joinery. The TCT & diamond-coated cutting edges stay sharp longer ensuring smooth feed & consistent bevel quality at high RPM.

Use with Power Tools & explore other precision Router Bits within the Power Tool Accessories range to complete your setup. Prep surfaces using Grinders & Sanders check dimensions with Measuring & Layout Tools & secure gear in Tool Storage & Workbenches. Stay protected with Work Safety Protections & enjoy Same day dispatch plus ongoing tool & equipment Care service.

► TCT & diamond-coated carbide edges for lasting sharpness
► Angles from 22.5°–80° for versatile bevel shaping
► Bearing-guided design for accuracy & stability
► Backed by Same day dispatch & full Trade Guarantee

Frequently Asked Questions

They’re used to create angled bevel edges on timber MDF & laminate boards, perfect for joints & furniture detailing.

Yes. The carbide & diamond-coated designs handle dense hardwood MDF & engineered boards with ease.

45° is most common for general woodworking, while 22.5° & 30° suit finer trims & 65° or higher are ideal for feature edges.

Keep bits sharp clean after use & store them in Tool Storage & Workbenches to prevent edge wear.

Brands

Carbitool

Carbitool