► Carbitool | Carbides Burs

High-Performance Burs for Metal, Wood & Composite Finishing Built for controlled shaping, smoothing & material removal, Carbitool Carbide Burs deliver outstanding cutting balance across metal, timber & composite materials. Made from solid tungsten carbide, these burs provide clean, chatter-free performance at high speeds — ideal for deburring, blending & contouring...

High-Performance Burs for Metal, Wood & Composite Finishing

Built for controlled shaping, smoothing & material removal, Carbitool Carbide Burs deliver outstanding cutting balance across metal, timber & composite materials. Made from solid tungsten carbide, these burs provide clean, chatter-free performance at high speeds — ideal for deburring, blending & contouring in workshop or site applications. Each head is ground to tight tolerances for consistency, allowing operators to achieve accurate shaping without burning or load-up.

Carbitool Carbide Burs are trusted by metalworkers, fitters & wood machinists who demand strength, stability & clean-cut results. Compatible with Die Grinders, Router & Saw Accessories & Drill Accessories, they offer dependable performance in both portable & bench setups. Whether refining welds, smoothing castings or cleaning up routed edges, each bur maintains a sharp bite under pressure. Used widely in Advanced Carpentry & Joinery workshops & fabrication setups, Carbitool burs reduce downtime & surface finishing time. With Same-Day Dispatch, every bur arrives ready to perform where accuracy & durability matter.

What’s in This Collection:

► Bur Ball Shape 3/4 Dia
‣ Large-diameter carbide bur for smooth contouring & surface blending.

► 14° Incl. Taper 5/8In
‣ Tapered profile ideal for beveling & chamfering metal, wood or composite edges.

► Ball Shape 3/4In 3/8In Sh
‣ Heavy-duty bur for shaping wide radii & blending weld seams cleanly.

► Ball Shape 3/8In
‣ Compact bur for fine-detail work, slot cleanout & tight access shaping.

► Bur 14° Incl. Taper 1/4 Dia
‣ Slim-taper bur for intricate trimming & edge refinement.

► Bur 14° Incl. Taper 3/8 Dia
‣ Mid-size taper bur for controlled shaping across dense or hardened materials.

► Bur 14° Incl. Taper 5/8 Dia
‣ Extended taper head for smooth deburring in high-speed applications.

► Bur Ball Shape 1/4 Dia
‣ Small-radius bur suited for light shaping, engraving & confined detailing.

► Bur Ball Shape 1In Dia 3/8In Sh
‣ Extra-large bur for heavy shaping, weld blending & high-feed profiling.

 

Sidebar
Filter
  • 10
  • 15
  • 20
  • 25
  • 30
  • 50
  • Featured
  • Most relevant
  • Best selling
  • Alphabetically, A-Z
  • Alphabetically, Z-A
  • Price, low to high
  • Price, high to low
  • Date, old to new
  • Date, new to old
Sort

Sort by:

  • Featured
  • Most relevant
  • Best selling
  • Alphabetically, A-Z
  • Alphabetically, Z-A
  • Price, low to high
  • Price, high to low
  • Date, old to new
  • Date, new to old
  • Carbitool - Cyl Ball Nose Shape 1/4" | PC 32 1000
    Carbitool - Cyl Ball Nose Shape 1/4" | PC 32 1000
    Carbitool Cyl Ball Nose Shape 1/4" | PC 32 1000The Carbitool router bit is precision-made in Australia from solid carbide or tungsten-carbide-tipped (TCT) construction for clean, accurate routing in timber, MDF, laminate and composites. Sharp, durable edges deliver a smooth finish and long tool...
    $50.66
    $50.66
  • Carbitool - Cyl Ball Nose Shape 3/4" 3/8" | PC 32 1005
    Carbitool - Cyl Ball Nose Shape 3/4" 3/8" | PC 32 1005
    Carbitool Cyl Ball Nose Shape 3/4" 3/8" | PC 32 1005The Carbitool router bit is precision-made in Australia from solid carbide or tungsten-carbide-tipped (TCT) construction for clean, accurate routing in timber, MDF, laminate and composites. Sharp, durable edges deliver a smooth finish and long...
    $215.94
    $215.94
  • Carbitool - Cyl Ball Nose Shape 3/4" 6" Lo | PCX 32 1004
    Carbitool - Cyl Ball Nose Shape 3/4" 6" Lo | PCX 32 1004
    Carbitool Cyl Ball Nose Shape 3/4" 6" Lo | PCX 32 1004The Carbitool router bit is precision-made in Australia from solid carbide or tungsten-carbide-tipped (TCT) construction for clean, accurate routing in timber, MDF, laminate and composites. Sharp, durable edges deliver a smooth finish and...
    $168.78
    $168.78
  • Carbitool - Cyl Ball Nose Shape 3/4" | PC 32 1004
    Carbitool - Cyl Ball Nose Shape 3/4" | PC 32 1004
    Carbitool Cyl Ball Nose Shape 3/4" | PC 32 1004The Carbitool router bit is precision-made in Australia from solid carbide or tungsten-carbide-tipped (TCT) construction for clean, accurate routing in timber, MDF, laminate and composites. Sharp, durable edges deliver a smooth finish and long tool...
    $207.82
    $207.82
  • Carbitool - Cyl Ball Nose Shape 3/8" | PC 32 1001
    Carbitool - Cyl Ball Nose Shape 3/8" | PC 32 1001
    Carbitool Cyl Ball Nose Shape 3/8" | PC 32 1001The Carbitool router bit is precision-made in Australia from solid carbide or tungsten-carbide-tipped (TCT) construction for clean, accurate routing in timber, MDF, laminate and composites. Sharp, durable edges deliver a smooth finish and long tool...
    $67.80
    $67.80
  • Carbitool - Cyl Ball Nose Shape 5/8" | PC 32 1003
    Carbitool - Cyl Ball Nose Shape 5/8" | PC 32 1003
    Carbitool Cyl Ball Nose Shape 5/8" | PC 32 1003The Carbitool router bit is precision-made in Australia from solid carbide or tungsten-carbide-tipped (TCT) construction for clean, accurate routing in timber, MDF, laminate and composites. Sharp, durable edges deliver a smooth finish and long tool...
    $151.32
    $151.32
  • Carbitool - Cyl Shape 1/2" 6" Long | PMX 41 1005
    Carbitool - Cyl Shape 1/2" 6" Long | PMX 41 1005
    Carbitool Cyl Shape 1/2" 6" Long | PMX 41 1005The Carbitool router bit is precision-made in Australia from solid carbide or tungsten-carbide-tipped (TCT) construction for clean, accurate routing in timber, MDF, laminate and composites. Sharp, durable edges deliver a smooth finish and long tool...
    $102.26
    $102.26
  • Carbitool - Cyl Shape 1/4" 6" Long | PMX 41 1002
    Carbitool - Cyl Shape 1/4" 6" Long | PMX 41 1002
    Carbitool Cyl Shape 1/4" 6" Long | PMX 41 1002The Carbitool router bit is precision-made in Australia from solid carbide or tungsten-carbide-tipped (TCT) construction for clean, accurate routing in timber, MDF, laminate and composites. Sharp, durable edges deliver a smooth finish and long tool...
    $46.46
    $46.46
  • Carbitool - Cyl Shape 3/8" 6" Long | PMX 41 1004
    Carbitool - Cyl Shape 3/8" 6" Long | PMX 41 1004
    Carbitool Cyl Shape 3/8" 6" Long | PMX 41 1004The Carbitool router bit is precision-made in Australia from solid carbide or tungsten-carbide-tipped (TCT) construction for clean, accurate routing in timber, MDF, laminate and composites. Sharp, durable edges deliver a smooth finish and long tool...
    $65.54
    $65.54
  • Carbitool - Egg Shape 1/2" 6" Long | PMX 46 1003
    Carbitool - Egg Shape 1/2" 6" Long | PMX 46 1003
    Carbitool Egg Shape 1/2" 6" Long | PMX 46 1003The Carbitool router bit is precision-made in Australia from solid carbide or tungsten-carbide-tipped (TCT) construction for clean, accurate routing in timber, MDF, laminate and composites. Sharp, durable edges deliver a smooth finish and long tool...
    $106.84
    $106.84
  • Carbitool - Egg Shape 1/2" | PC 36 1002
    Carbitool - Egg Shape 1/2" | PC 36 1002
    Carbitool Egg Shape 1/2" | PC 36 1002The Carbitool router bit is precision-made in Australia from solid carbide or tungsten-carbide-tipped (TCT) construction for clean, accurate routing in timber, MDF, laminate and composites. Sharp, durable edges deliver a smooth finish and long tool life.► Key...
    $90.44
    $90.44
  • Carbitool - Egg Shape 1/4" 6" Long | PMX 46 1001
    Carbitool - Egg Shape 1/4" 6" Long | PMX 46 1001
    Carbitool Egg Shape 1/4" 6" Long | PMX 46 1001The Carbitool router bit is precision-made in Australia from solid carbide or tungsten-carbide-tipped (TCT) construction for clean, accurate routing in timber, MDF, laminate and composites. Sharp, durable edges deliver a smooth finish and long tool...
    $60.26
    $60.26
  • Carbitool - Egg Shape 3/4" 3/8" Sh | PC 36 1005
    Carbitool - Egg Shape 3/4" 3/8" Sh | PC 36 1005
    Carbitool Egg Shape 3/4" 3/8" Sh | PC 36 1005The Carbitool router bit is precision-made in Australia from solid carbide or tungsten-carbide-tipped (TCT) construction for clean, accurate routing in timber, MDF, laminate and composites. Sharp, durable edges deliver a smooth finish and long tool...
    $225.18
    $225.18
  • Carbitool - Egg Shape 3/4" | PC 36 1004
    Carbitool - Egg Shape 3/4" | PC 36 1004
    Carbitool Egg Shape 3/4" | PC 36 1004The Carbitool router bit is precision-made in Australia from solid carbide or tungsten-carbide-tipped (TCT) construction for clean, accurate routing in timber, MDF, laminate and composites. Sharp, durable edges deliver a smooth finish and long tool life.► Key...
    $217.04
    $217.04
  • Carbitool - Egg Shape 3/8" 6" Long | PMX 46 1002
    Carbitool - Egg Shape 3/8" 6" Long | PMX 46 1002
    Carbitool Egg Shape 3/8" 6" Long | PMX 46 1002The Carbitool router bit is precision-made in Australia from solid carbide or tungsten-carbide-tipped (TCT) construction for clean, accurate routing in timber, MDF, laminate and composites. Sharp, durable edges deliver a smooth finish and long tool...
    $72.96
    $72.96
  • Carbitool - Egg Shape 3/8" | PC 36 1001
    Carbitool - Egg Shape 3/8" | PC 36 1001
    Carbitool Egg Shape 3/8" | PC 36 1001The Carbitool router bit is precision-made in Australia from solid carbide or tungsten-carbide-tipped (TCT) construction for clean, accurate routing in timber, MDF, laminate and composites. Sharp, durable edges deliver a smooth finish and long tool life.► Key...
    $73.38
    $73.38
  • Carbitool - Egg Shape 5/8" | PC 36 1003
    Carbitool - Egg Shape 5/8" | PC 36 1003
    Carbitool Egg Shape 5/8" | PC 36 1003The Carbitool router bit is precision-made in Australia from solid carbide or tungsten-carbide-tipped (TCT) construction for clean, accurate routing in timber, MDF, laminate and composites. Sharp, durable edges deliver a smooth finish and long tool life.► Key...
    $162.84
    $162.84
  • Carbitool - Flame Shape 1/2" 6" Long | PMX 51 1002
    Carbitool - Flame Shape 1/2" 6" Long | PMX 51 1002
    Carbitool Flame Shape 1/2" 6" Long | PMX 51 1002The Carbitool router bit is precision-made in Australia from solid carbide or tungsten-carbide-tipped (TCT) construction for clean, accurate routing in timber, MDF, laminate and composites. Sharp, durable edges deliver a smooth finish and long tool...
    $152.80
    $152.80
  • Carbitool - Flame Shape 5/16" 6" Long | PMX 51 1001
    Carbitool - Flame Shape 5/16" 6" Long | PMX 51 1001
    Carbitool Flame Shape 5/16" 6" Long | PMX 51 1001The Carbitool router bit is precision-made in Australia from solid carbide or tungsten-carbide-tipped (TCT) construction for clean, accurate routing in timber, MDF, laminate and composites. Sharp, durable edges deliver a smooth finish and long tool...
    $75.04
    $75.04
  • Carbitool - Miniature Bur C Series 1/16" | PM13C
    Carbitool - Miniature Bur C Series 1/16" | PM13C
    Carbitool Miniature Bur C Series 1/16" | PM13CThe Carbitool router bit is precision-made in Australia from solid carbide or tungsten-carbide-tipped (TCT) construction for clean, accurate routing in timber, MDF, laminate and composites. Sharp, durable edges deliver a smooth finish and long tool life.► Key...
    $19.56
    $19.56

Tough Performance for Trade Applications

Carbitool Carbide Burs are built for trades that expect speed, balance & long tool life. Each bur is CNC-ground for true concentricity, ensuring smooth engagement with minimal vibration. Used alongside Welding Machines, they remove weld spatter or clean joint areas with minimal heat transfer. In Specialty Woodworking Tools environments, they’re ideal for contour shaping, carving & fine surface correction.

Trades operating across mixed materials pair these burs with Grinder Accessories & Drill Accessories to achieve clean, uniform finishes under sustained use. Supported by Trade Support Solutions & Warranty & Parts Support, Carbitool guarantees consistent cutting performance & long-term reliability on every job.


► Solid tungsten carbide heads for extended wear life
► Clean, chatter-free performance at high RPM
► Reliable control across metals, hardwoods & composites
► Compatible with die grinders & rotary tools
► Same-Day Dispatch for workshop readiness
► Trade Support Solutions for ongoing technical help

Frequently Asked Questions

They’re used to cut, shape or finish metal, wood & composite materials — ideal for grinding, smoothing & surface cleanup.

Yes. They’re compatible with most high-speed Die Grinders & rotary tools fitted with 1/4" or 3/8" shanks.

Maintain proper RPM, clear debris regularly & secure your workpiece with Clamps & Vises for clean chip evacuation.

Brands

Carbitool

Carbitool